1794-TB32 - In Stock | Allen Bradley PLC Flex I/O 1794

1794-TB32

Rated 4.4 with 22 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1794-TB32

Revisions: Ser A 
Description: The Allen-Bradley 1794-TB32 terminal base is a Flex I/O 1794 series terminal base unit. It is used to host different kinds of modules in complete Flex I/O systems. The 1794-TB32 terminal base unit supports panel mounting and DIN Rail mounting for itself and the module that it hosts. It has 32 I/O terminals, 8 common terminals, and 8 voltage terminals. The 1794-TB32 terminal base unit is open-style equipment with an IP 20 environmental protection rating.
In Stock Ships Today
Request a quote for 1794-TB32

Description: The Allen-Bradley 1794-TB32 terminal base is a Flex I/O 1794 series terminal base unit. It is used to host different kinds of modules in complete Flex I/O systems. The 1794-TB32 terminal base unit supports panel mounting and DIN Rail mounting for itself and the module that it hosts. It has 32 I/O terminals, 8 common terminals, and 8 voltage terminals. The 1794-TB32 terminal base unit is open-style equipment with an IP 20 environmental protection rating.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1794-TB32.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.4 with 22 reviews

    Technical Specifications for 1794-TB32

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1794-TB32
Product TypeFlex I/O Terminal Base Unit
Terminal Screw Torque0.56-0.79 Nm
Supply Voltage Range max.31.2V DC/AC, 50/60Hz, 10A
Isolation Voltage50V Continuous max.
Voltage Rating24V DC/AC
Wire Size0.21-1.3 mm^2
Dimensions94x94x69 mm
UPC10612598281227
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1794-TB32
Product TypeFlex I/O Terminal Base Unit
Terminal Screw Torque0.56-0.79 Nm
Supply Voltage Range max.31.2V DC/AC, 50/60Hz, 10A
Isolation Voltage50V Continuous max.
Voltage Rating24V DC/AC
Wire Size0.21-1.3 mm^2
Dimensions94x94x69 mm
UPC10612598281227
s

About 1794-TB32

The 1794-TB32 Flex I/O 24 Volt AC/DC Terminal Base Unit by Allen Bradley is a terminal base unit designed specifically for 32 point modules to provide connection points for input/output wiring. It has a 32 I/O maximum connection capacity, with 8 common terminals and 8 Voltage terminals, and is used in a 31.2 Volt DC application. It has a current capacity of 10 A, and a FLEXBUS rating of 640 mA and 5 Volts DC, with 2 A maximum I/O terminal rating, and a V/COM terminal rating of 31.2 Volts DC/AC at 50 to 60 Hertz. It is capable of providing 50 Volts circuit isolation with Basic Type insulation tested at 2121 Volts DC for 1 minute between Field-Wiring Terminals to FLEXBUS.



The 1794-TB32 has both IEC T4 and T4A (North America) temperature codes and comes with an open style enclosure. It has an operational temperature range within -20 and 70 degrees Celsius (-4 and 58 degrees Fahrenheit) in a 5% to 95% non-condensing humidity level, and is stored at -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit). The 1794-TB32 is tested to maintain performance within standard specification at a 5 G operational vibration and a 30 G shock rating. It has approximate dimensions of  94 x 94 x 69 millimeters (3.7 x 3.7 x 2.7 inches) with the module installed on it and is c-UL-us and CSA certified.



Technical Description of 1794-TB32

The Allen-Bradley 1794-TB32 Flex I/O Terminal Base Unit has a 0.56-0.79 Nm Terminal Screw Torque, a 31.2V DC/AC, 50/60Hz, 10A Supply Voltage Range max., and a 50V Continuous max. Isolation Voltage. It also operates with a 0.21-1.3 mm^2 Wire Size and a 94x94x69 mm Dimensions.

Repair Services for 1794-TB32

Type Lead Time Price Action
Repair Service 2-4 weeks $96cartAdd to Cart

Our highly skilled technicians can repair your 1794-TB32. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1794-TB32

Please refer to the manual for more information about the 1794-TB32 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1794-TB32 Ser A
1794-TB32/A, Series A, Rev A Request Quote
Common misspellings:
  • l794-TB32
  • 179A-TB32
  • 1794-T832
  • 1794TB32

Dimensions For 1794-TB32

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1794-TB32

Resolutions For 1794-TB32

About

Technical Specifications for 1794-TB32

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1794-TB32
Product TypeFlex I/O Terminal Base Unit
Terminal Screw Torque0.56-0.79 Nm
Supply Voltage Range max.31.2V DC/AC, 50/60Hz, 10A
Isolation Voltage50V Continuous max.
Voltage Rating24V DC/AC
Wire Size0.21-1.3 mm^2
Dimensions94x94x69 mm
UPC10612598281227
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1794-TB32
Product TypeFlex I/O Terminal Base Unit
Terminal Screw Torque0.56-0.79 Nm
Supply Voltage Range max.31.2V DC/AC, 50/60Hz, 10A
Isolation Voltage50V Continuous max.
Voltage Rating24V DC/AC
Wire Size0.21-1.3 mm^2
Dimensions94x94x69 mm
UPC10612598281227

About 1794-TB32

The 1794-TB32 Flex I/O 24 Volt AC/DC Terminal Base Unit by Allen Bradley is a terminal base unit designed specifically for 32 point modules to provide connection points for input/output wiring. It has a 32 I/O maximum connection capacity, with 8 common terminals and 8 Voltage terminals, and is used in a 31.2 Volt DC application. It has a current capacity of 10 A, and a FLEXBUS rating of 640 mA and 5 Volts DC, with 2 A maximum I/O terminal rating, and a V/COM terminal rating of 31.2 Volts DC/AC at 50 to 60 Hertz. It is capable of providing 50 Volts circuit isolation with Basic Type insulation tested at 2121 Volts DC for 1 minute between Field-Wiring Terminals to FLEXBUS.



The 1794-TB32 has both IEC T4 and T4A (North America) temperature codes and comes with an open style enclosure. It has an operational temperature range within -20 and 70 degrees Celsius (-4 and 58 degrees Fahrenheit) in a 5% to 95% non-condensing humidity level, and is stored at -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit). The 1794-TB32 is tested to maintain performance within standard specification at a 5 G operational vibration and a 30 G shock rating. It has approximate dimensions of  94 x 94 x 69 millimeters (3.7 x 3.7 x 2.7 inches) with the module installed on it and is c-UL-us and CSA certified.



Technical Description of 1794-TB32

The Allen-Bradley 1794-TB32 Flex I/O Terminal Base Unit has a 0.56-0.79 Nm Terminal Screw Torque, a 31.2V DC/AC, 50/60Hz, 10A Supply Voltage Range max., and a 50V Continuous max. Isolation Voltage. It also operates with a 0.21-1.3 mm^2 Wire Size and a 94x94x69 mm Dimensions.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $96cartAdd to Cart

Our highly skilled technicians can repair your 1794-TB32. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $96cartAdd to Cart

Our highly skilled technicians can repair your 1794-TB32. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1794-TB32 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1794-TB32 Ser A
1794-TB32/A, Series A, Rev A Request Quote

Common misspellings:
  • l794-TB32
  • 179A-TB32
  • 1794-T832
  • 1794TB32
PDF