1794-TB32S - In Stock | Allen Bradley PLC Flex I/O 1794

1794-TB32S

Rated 4.3 with 16 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1794-TB32S

Revisions: Ser A 
Description: The 1794-TB32S terminal base is an Allen-Bradley/Rockwell Automation terminal base unit from the Flex I/O 1794 series. It comes with 48 total terminals that include 32 I/O terminals, 8 common terminals, and 8 voltage terminals. The 1794-TB32S terminal base unit is a spring clamp type of terminal base unit. It can operate with a maximum voltage capacity of 31.2 Volts DC and a maximum current capacity of 10 Amps. The 1794-TB32S terminal base unit supports solid and stranded copper wire with a gauge of 22 to 12 AWG.
In Stock Ships Today
Request a quote for 1794-TB32S

Description: The 1794-TB32S terminal base is an Allen-Bradley/Rockwell Automation terminal base unit from the Flex I/O 1794 series. It comes with 48 total terminals that include 32 I/O terminals, 8 common terminals, and 8 voltage terminals. The 1794-TB32S terminal base unit is a spring clamp type of terminal base unit. It can operate with a maximum voltage capacity of 31.2 Volts DC and a maximum current capacity of 10 Amps. The 1794-TB32S terminal base unit supports solid and stranded copper wire with a gauge of 22 to 12 AWG.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1794-TB32S.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.3 with 16 reviews

    Technical Specifications for 1794-TB32S

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1794-TB32S
Product TypeFlex I/O Terminal Base Unit
Terminal Screw Torque0.56-0.79 Nm
Supply Voltage Range max.31.2V DC/AC, 50/60Hz, 10A
ListingThis specification list was created by dosupply.com.
Isolation Voltage50V Continuous max.
Voltage Rating24V DC/AC
Wire Size0.34-3.3mm^2
Dimensions94x94x69 mm
UPC10612598281210
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1794-TB32S
Product TypeFlex I/O Terminal Base Unit
Terminal Screw Torque0.56-0.79 Nm
Supply Voltage Range max.31.2V DC/AC, 50/60Hz, 10A
Isolation Voltage50V Continuous max.
Voltage Rating24V DC/AC
Wire Size0.34-3.3mm^2
Dimensions94x94x69 mm
UPC10612598281210
s

About 1794-TB32S

The 1794-TB32S Flex I/O Terminal Base Unit by Allen Bradley is a 32 I/O point terminal base unit with 8 common terminals and 8 voltage terminals. It uses a Spring-Clamp termination type and is designed for use in applications with up to 31.2 Volts DC with a 10 A maximum current capacity. It connects FLEX I/O modules to the I/O bus, has a FLEXBUS rating of 5 Volts DC and 640 mA, and provides a 2 A I/O terminal current. It has a voltage/COM terminal rating of 31.2 Volts AC/DC at 50 to 60 Hertz, with 24 Volts AC/DC working voltage, and provides 50 Volts isolation voltage between Field Wiring Terminals to FLEXBUS, using basic insulation tested at 2121 Volts DC for 60 seconds.



It utilizes a 0.34 x 3.3 millimeter (22-12 AWG) solid or stranded copper wire, with 3 wire screws used for termination purpose. The 1794-TB32S has the T4A (North America) temperature code with T4 IEC temperature codes and is enclosed in an open style casing. It has an operational temperature range between -20 to 70 degrees Celsius (-4 to 158 degrees Fahrenheit), at 5% to 95% ambient humidity, and a non-operational temperature range between -40 and 85 degrees Celsius (-40 to 185 degrees Fahrenheit). It is UL Listed for Class I, Division 2, Groups A, B, C, and D, and Hazardous Location/CE certified.



Technical Description of 1794-TB32S

The Allen-Bradley 1794-TB32S Flex I/O Terminal Base Unit has a 0.56-0.79 Nm Terminal Screw Torque, a 31.2V DC/AC, 50/60Hz, 10A Supply Voltage Range max., and a 50V Continuous max. Isolation Voltage. It also operates with a 0.34-3.3mm^2 Wire Size and a 94x94x69 mm Dimensions.

Repair Services for 1794-TB32S

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1794-TB32S. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1794-TB32S

Please refer to the manual for more information about the 1794-TB32S such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1794-TB32S Ser A
1794-TB32S/A, Series A, Rev A Request Quote
Common misspellings:
  • l794-TB32S
  • 179A-TB32S
  • 1794-T832S
  • 1794TB32S

Dimensions For 1794-TB32S

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1794-TB32S

Resolutions For 1794-TB32S

About

Technical Specifications for 1794-TB32S

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1794-TB32S
Product TypeFlex I/O Terminal Base Unit
Terminal Screw Torque0.56-0.79 Nm
Supply Voltage Range max.31.2V DC/AC, 50/60Hz, 10A
Isolation Voltage50V Continuous max.
Voltage Rating24V DC/AC
Wire Size0.34-3.3mm^2
Dimensions94x94x69 mm
UPC10612598281210
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1794-TB32S
Product TypeFlex I/O Terminal Base Unit
Terminal Screw Torque0.56-0.79 Nm
Supply Voltage Range max.31.2V DC/AC, 50/60Hz, 10A
Isolation Voltage50V Continuous max.
Voltage Rating24V DC/AC
Wire Size0.34-3.3mm^2
Dimensions94x94x69 mm
UPC10612598281210

About 1794-TB32S

The 1794-TB32S Flex I/O Terminal Base Unit by Allen Bradley is a 32 I/O point terminal base unit with 8 common terminals and 8 voltage terminals. It uses a Spring-Clamp termination type and is designed for use in applications with up to 31.2 Volts DC with a 10 A maximum current capacity. It connects FLEX I/O modules to the I/O bus, has a FLEXBUS rating of 5 Volts DC and 640 mA, and provides a 2 A I/O terminal current. It has a voltage/COM terminal rating of 31.2 Volts AC/DC at 50 to 60 Hertz, with 24 Volts AC/DC working voltage, and provides 50 Volts isolation voltage between Field Wiring Terminals to FLEXBUS, using basic insulation tested at 2121 Volts DC for 60 seconds.



It utilizes a 0.34 x 3.3 millimeter (22-12 AWG) solid or stranded copper wire, with 3 wire screws used for termination purpose. The 1794-TB32S has the T4A (North America) temperature code with T4 IEC temperature codes and is enclosed in an open style casing. It has an operational temperature range between -20 to 70 degrees Celsius (-4 to 158 degrees Fahrenheit), at 5% to 95% ambient humidity, and a non-operational temperature range between -40 and 85 degrees Celsius (-40 to 185 degrees Fahrenheit). It is UL Listed for Class I, Division 2, Groups A, B, C, and D, and Hazardous Location/CE certified.



Technical Description of 1794-TB32S

The Allen-Bradley 1794-TB32S Flex I/O Terminal Base Unit has a 0.56-0.79 Nm Terminal Screw Torque, a 31.2V DC/AC, 50/60Hz, 10A Supply Voltage Range max., and a 50V Continuous max. Isolation Voltage. It also operates with a 0.34-3.3mm^2 Wire Size and a 94x94x69 mm Dimensions.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1794-TB32S. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1794-TB32S. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1794-TB32S such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1794-TB32S Ser A
1794-TB32S/A, Series A, Rev A Request Quote

Common misspellings:
  • l794-TB32S
  • 179A-TB32S
  • 1794-T832S
  • 1794TB32S
PDF