Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors 100-D110EZJ11

Product image is representative; revision or series may vary. Contact us to request a specific version.

100-D110EZJ11

|
Need a Specific Revision?

The 100-D110EZJ11 contactor is a non-reversing IEC-certified contactor with an electronic DC coil manufactured by Allen-Bradley/Rockwell Automation in the Bulletin 100-D contactors series. Its electronic DC coil features an electronic interface and has a rated coil voltage of 24 Volts DC. It includes three main contacts and two auxiliary contacts.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 100-D110EZJ11

ManufacturerAllen Bradley
CategoryPLCs
Product LineIEC 100 Contactors
Part Number100-D110EZJ11
Weight8.75 lbs (3.97 kg)
DescriptionNon-Reversing Contactor
Type of ContactorMCS Contactor
Rated Operating Current110 A, AC-3
Coil TypeElectronic DC Coil
Coil Voltage24 Volts DC
Coil FeatureIntegrated Electronic Interface (EI)
Main Poles3
Auxiliary Contacts1 NO, 1 NC
Operational Power Rating40 Hp at 230V, 75 Hp at 460V, 100 Hp at 575V
Operating Temperature Range-25 to 60 degrees Celsius
Request a Repair

The 100-D110EZJ11 contactor is a non-reversing contactor with an electronic coil manufactured by Allen-Bradley/Rockwell Automation. It is an Allen-Bradley Bulletin 100-D series MCS (Motor Control System) contactor. It has a small footprint, measuring approximately 170 millimeters in height, 120 millimeters in width, and 156 millimeters in depth. The unit is panel mountable. The Allen-Bradley 100-D110EZJ11 contactor is a DC-operated contactor with an electronic DC coil and an electronic interface. It has a rated operational current of 110 Amps for AC-3 utilization category applications. This non-reversing contactor's electronic DC coil has a rated coil voltage of 24 Volts DC. The electronic interface on the coil uses 15 milliamps of operating current and a signal voltage rating of 24 Volts DC. With low pick-up and hold-in power consumption ratings of 240 Watts and 6 Watts, the electronic coil on this contactor is designed to reduce power consumption.

The Allen-Bradley/Rockwell Automation Bulletin 100-D series 100-D110EZJ11 non-reversing IEC contactor has 3 main poles as main contacts and also 2 auxiliary contacts. The auxiliary contacts are one normally open contact and one normally closed contact. The coil's operational output power ratings at 230 Volts, 460 Volts, and 575 Volts are 40 Horsepower, 75 Horsepower, and 100 Horsepower, respectively. The 100-D110EZJ11 contactor has a rated operating current of 160 Amps for AC-1 applications at 50 Hertz operating frequency and a 40 degrees Celsius ambient temperature. It can operate normally at temperatures ranging from-25 to 60 degrees Celsius. According to the IEC standards, it has an IP00 protection class rating and it is resistant to shock and mechanical vibration.