The product code 100-D110H00 is an order reference for an Allen-Bradley/Rockwell Automation non-reversing contactor that is intended for installation in flexible and highly reliable machine and control systems in different industries. This standard contactor component is made with a robust protective housing that meets all the industrial requirements for environmental safety and for handling common operating conditions in a standard industrial setting. The 100-D110H00 contactor is part of the Allen-Bradley Bulletin 100-D contactors series and it features 3 poles for main contacts. This AC-operated contactor performs well in any standard industrial condition and it has a current rating of 110 Amps. In addition to that, the unit is of non-reversing type and it has a specified operating frequency of 60 Hertz.

As can be seen from the last 2 digits of the product code, the 100-D110H00 contactor does not include any auxiliary contacts. The coil voltage rating of the unit is 208 Volts and the unit features a conventional coil instead of an electronic one. According to the manufacturer’s technical data, the 100-D110H00 contactor has a different output power rating for each supported voltage rating when it is used for switching AC motors. The supported output power ratings run from 37 to 110 kilowatts at 230 to 690 Volts, respectively. This particular contactor has low power consumption ratings and it is designed for a variety of applications that include different loads and control motors. The unit complies with the IEC standards, but it also meets requirements of standards like the CSA and UL standards. The protection rating of the unit is IP 00 on its own but it can be increased with optional protective accessories. All of the Bulletin 100-D contactor units share common accessories that are provided by Allen-Bradley and that can be used to enhance their operation.