100-D110J00

The Allen-Bradley 100-D110J00 contactor is a 110 Amps-rated IEC 100 and Bulletin 100-D contactor. It features a conventional coil rated for 24 Volts AC at 60 Hertz frequency. The insulation class of the coil is Class B per the VDE 0660 standards. There are no auxiliary contacts on the contactor. The 100-D110J00 contactor belongs to the Bulletin 100-D contactor series. Features of the contactors from the Bulletin 100-D series include support for panel mounting only, environmentally friendly contactor construction, and AC/DC coil control. Optional accessories for the series include various connecting components, terminal lugs, IP 20 terminal blocks, and surge suppressors. The environmental protection class of the 100-D110J00 contactor is IP 00. The contactor is finger and back-of-hand proof as per the VDE 0106 standards. It complies with resistance to shock ratings from the IEC 60068-2-27 standards.

The Allen-Bradley Bulletin 100-D 100-D110J00 contactor also complies with resistance to vibration ratings from the IEC 60068-2-6 standards. The rated isolation voltage for the 100-D110J00 contactor is 1000 Volts per the IEC standards and 600 Volts per the UL/CSA standards. Optimal contactor performance requires a -25 to 60 degrees Celsius ambient temperature. If the ambient temperature reaches 70 degrees Celsius, the current reduces by 15% compared to the current value at 60 degrees Celsius. Allen-Bradley recommends that the 100-D110J00 contactor only be serviced by trained personnel. Due to the presence of dangerous electrical voltages, the main supply must be disconnected before any work on the contactor begins. The magnet coil, main contacts, and the arc-chute on the contactor can be replaced if required. To ensure long-term reliability, only original Allen-Bradley Bulletin 100-D spare parts and accessories should be used for the contactor.