The 100-D110J11 contactor is an industrial 3-pole IEC contactor manufactured by Allen-Bradley. It is part of the Allen-Bradley IEC 100 series of industrial contactors and it is also part of the Bulletin 100-D product line within the IEC 100 series. The 100-D110J11 3-pole IEC contactor has been both CE and cULus certified. The wires that are used to make the wiring connections for this 3-pole IEC contactor should all be copper wire that is rated for ambient operating temperatures that are as high as 75 degrees Celsius or 167 degrees Fahrenheit. The torque ratings for the terminal hardware that the 100-D110J11 3-pole IEC contactor uses are 9 N-m and 80 pounds on an inch. It supports a maximum AC-1 voltage rating of 1000 Volts with a current rating of 180 Amps.

The Allen-Bradley 100-D110J11 3-pole IEC contactor from the IEC 100 and Bulletin 100-D series can operate with both Horsepower output and kilowatt output. The type of output power that the contactor uses and the output power rating that it uses in a given application will depend on the type and rating of the voltage that it is using. When it is using 1-phase AC voltage, the 100-D110J11 3-pole IEC contactor supports Horsepower output ratings of 10 Horsepower at 115 Volts AC and 25 Horsepower at 230 Volts AC. When it is using 3-phase AC voltage, this contactor supports Horsepower output ratings of 40 Horsepower at 200 Volts AC and 230 Volts AC, 75 Horsepower at 460 Volts AC, and 100 Horsepower at 575 Volts AC. The 100-D110J11 3-pole IEC contactor’s kilowatt output ratings are 34 kilowatts minimum at 230 Volts AC-3 voltage and 106 kilowatts maximum at 690 Volts AC-3 voltage.