100-D110K11

The 100-D110K11 contactor is a non-reversing contactor that has been included in the IEC 100 and Bulletin 100-D series by Allen-Bradley. This contactor has been designed to operate in applications that involve the use of motors that are meant to operate with a non-reversing modality because it is a non-reversing contactor. This contactor operates well in 3-phase voltage applications and it comes with conventional coils. The users have the option of ordering this contactor with an embedded PLC interface. The Allen-Bradley 100-D110K11 non-reversing contactor comes with one N.O. auxiliary contact and one N.C. auxiliary contact. These contacts are gold-plated and they are well-suited for low-energy applications or feedback control circuits that use more than one contactor installed in a series.

The Allen-Bradley 100-D110K11 Bulletin 100-D non-reversing contactor includes a mirror contact design that includes the specific functions that are performed by the N.C. auxiliary contact that comes with the contactor. The N.C. auxiliary contact will not change its state even if one of the power contacts welds. This contactor also provides reliable indications of the status of the 3 power poles during operation. The Allen-Bradley 100-D110K11 non-reversing contactor operates with 3 main contact poles and it employs a voltage rating of 24 Volts AC at a specific frequency of 50 Hertz. It operates with maximum current ratings of 110 Amps and 160 Amps at temperatures of 60 and 40 degrees Celsius, respectively. This contactor can operate at its full rated voltage in a temperature range of -25 to 60 degrees Celsius. When operating at 70 degrees Celsius, its current will be derated by 15 percent compared to its value at 60 degrees Celsius so that the contactor can maintain stable operation.