The 100-D110KF00 contactor is an IEC contactor manufactured by Allen-Bradley. It is part of the Allen-Bradley IEC 100 Contactors series. This contactor does not support any spring terminals, but it supports industrial screw-type terminals that are thru-hole screw-type terminals. The 100-D110KF00 contactor also cannot be mounted on any kind of DIN Rail, but it can be mounted on a metal mounting panel for stability during operation. The 100-D110KF00 contactor is one of the IEC 100 series contactors that does not have built-in auxiliary contacts. It has 3 main contacts that act as its power poles and that it uses to make connections to a power source, but no auxiliary contacts for auxiliary connections. If this contactor needs auxiliary contacts, they need to be ordered separately and installed on the right and left sides of the contactor.

The Allen-Bradley 100-D110KF00 contactor from the IEC 100 Contactors series supports a maximum rated isolation voltage of 1000 Volts AC according to the IEC standards, 600 Volts AC according to the UL and CSA standards, and 12 kilovolts of maximum rated impulse voltage. The coil in the 100-D110KF00 contactor is a conventional coil that uses AC voltage. The AC voltage rating of this conventional coil is 230 Volts AC with a rated frequency of 50 to 60 Hertz. The 100-D110KF00 contactor’s coil also has a Class B insulation rating for protection. This contactor can operate at altitudes of up to 2000 meters above sea level without derating. Its ambient operating temperature range for normal operating runs from -25 to 60 degrees Celsius. In special circumstances, the 100-D110KF00 contactor can operate at up to 70 degrees Celsius, but only with a 15% reduction to its current rating.