100-D110KF11 | Allen Bradley PLC IEC 100 Contactors

100-D110KF11

Rated 4.6 with 7 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

100-D110KF11

Description: The 100-D110KF11 contactor is a Bulletin 100-D non-reversing IEC contactor from Allen-Bradley. It has an operating current rating of 110 Amps. It comes with a conventional coil with a control voltage rating of 230 Volts AC. It has 3 main poles and 2 auxiliary contacts, one normally open (N.O.) and one normally closed (N.C.).
Available Now
Request a quote for 100-D110KF11

Description:

The 100-D110KF11 contactor is a Bulletin 100-D non-reversing IEC contactor from Allen-Bradley. It has an operating current rating of 110 Amps. It comes with a conventional coil with a control voltage rating of 230 Volts AC. It has 3 main poles and 2 auxiliary contacts, one normally open (N.O.) and one normally closed (N.C.).


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-D110KF11.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 7 reviews

    Technical Specifications for 100-D110KF11

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D110KF11
DescriptionNon-Reversing IEC Contactor
Type of ContactorMCS D
Product LineBulletin 100-D
Phases3
Number of Poles 3
Current Rating 110 Amps (AC-3)
Coil TypeConventional AC Coil
Coil Voltage230 Volts AC
Coil Frequency50/60 Hertz
Auxiliary Contacts1 NO, 1 NC
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D110KF11
DescriptionNon-Reversing IEC Contactor
Type of ContactorMCS D
Product LineBulletin 100-D
Phases3
Number of Poles 3
Current Rating 110 Amps (AC-3)
Coil TypeConventional AC Coil
Coil Voltage230 Volts AC
Coil Frequency50/60 Hertz
Auxiliary Contacts1 NO, 1 NC
s

About 100-D110KF11

The 100-D110KF11 contactor is a non-reversing MCS contactor from Allen-Bradley. It is a contactor from the Allen-Bradley Bulletin 100-D contactor series that has been IEC certified. It has an operating current rating of 110 Amps at 400/525 Volts AC for the AC-3 utilization category. This non-reversing IEC contactor has a conventional coil (coil code "KF") with a 230 Volt AC control voltage rating. The AC coil on this contactor operates at 50/60 Hertz. The conventional coil does not come with an integrated electronic interface. The 100-D110KF11 non-reversing contactor has 3 main poles as main contacts. It also includes 2 auxiliary contacts, one normally open (N.O.) and one normally closed (N.C.). Side-mounted external auxiliary contact blocks are available for this model as accessories.



The Allen-Bradley Bulletin 100-D series 100-D110KF11 contactor has a rated output power of 55 kilowatts at 400 Volts AC, 63 kilowatts at 415 Volts AC, and 75 kilowatts at 500 Volts AC at a frequency of 50 Hertz. This contactor has a small form factor, measuring 170 millimeters in height, 120 millimeters in width, and 156 millimeters in depth, and it can be easily mounted on a panel. The AC-1 active power load rating of the 100-D110KF11 contactor is 160 Amps at 690 Volts AC and 40 degrees Celsius. The contactor's rated output power is 40 Horsepower at 200/230 Volts, 75 Horsepower at 460 Volts, and 100 Horsepower at 575 Volts AC at 60 Hertz. The 100-D110KF11 contactor supports a variety of external accessories including surge suppressor units, IP 20 terminal blocks, terminal lugs, and interlocks (mechanical/electrical). The device has UL, IEC, and CSA certifications.



Repair Services for 100-D110KF11

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D110KF11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-D110KF11

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-D110KF11

Resolutions For 100-D110KF11

About

Technical Specifications for 100-D110KF11

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D110KF11
DescriptionNon-Reversing IEC Contactor
Type of ContactorMCS D
Product LineBulletin 100-D
Phases3
Number of Poles 3
Current Rating 110 Amps (AC-3)
Coil TypeConventional AC Coil
Coil Voltage230 Volts AC
Coil Frequency50/60 Hertz
Auxiliary Contacts1 NO, 1 NC
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D110KF11
DescriptionNon-Reversing IEC Contactor
Type of ContactorMCS D
Product LineBulletin 100-D
Phases3
Number of Poles 3
Current Rating 110 Amps (AC-3)
Coil TypeConventional AC Coil
Coil Voltage230 Volts AC
Coil Frequency50/60 Hertz
Auxiliary Contacts1 NO, 1 NC

About 100-D110KF11

The 100-D110KF11 contactor is a non-reversing MCS contactor from Allen-Bradley. It is a contactor from the Allen-Bradley Bulletin 100-D contactor series that has been IEC certified. It has an operating current rating of 110 Amps at 400/525 Volts AC for the AC-3 utilization category. This non-reversing IEC contactor has a conventional coil (coil code "KF") with a 230 Volt AC control voltage rating. The AC coil on this contactor operates at 50/60 Hertz. The conventional coil does not come with an integrated electronic interface. The 100-D110KF11 non-reversing contactor has 3 main poles as main contacts. It also includes 2 auxiliary contacts, one normally open (N.O.) and one normally closed (N.C.). Side-mounted external auxiliary contact blocks are available for this model as accessories.



The Allen-Bradley Bulletin 100-D series 100-D110KF11 contactor has a rated output power of 55 kilowatts at 400 Volts AC, 63 kilowatts at 415 Volts AC, and 75 kilowatts at 500 Volts AC at a frequency of 50 Hertz. This contactor has a small form factor, measuring 170 millimeters in height, 120 millimeters in width, and 156 millimeters in depth, and it can be easily mounted on a panel. The AC-1 active power load rating of the 100-D110KF11 contactor is 160 Amps at 690 Volts AC and 40 degrees Celsius. The contactor's rated output power is 40 Horsepower at 200/230 Volts, 75 Horsepower at 460 Volts, and 100 Horsepower at 575 Volts AC at 60 Hertz. The 100-D110KF11 contactor supports a variety of external accessories including surge suppressor units, IP 20 terminal blocks, terminal lugs, and interlocks (mechanical/electrical). The device has UL, IEC, and CSA certifications.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D110KF11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D110KF11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF