100-D110ZA22L | Allen Bradley PLC IEC 100 Contactors

100-D110ZA22L

Rated 5 with 19 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

100-D110ZA22L

Description: The Allen-Bradley 100-D110ZA22L contactor is a 110 Amps-rated IEC 100 contactor. It has 3 poles. The 100-D110ZA22L contactor has 2 NC and 2 NO auxiliary contacts.
Available Now
Request a quote for 100-D110ZA22L

Description:

The Allen-Bradley 100-D110ZA22L contactor is a 110 Amps-rated IEC 100 contactor. It has 3 poles. The 100-D110ZA22L contactor has 2 NC and 2 NO auxiliary contacts.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-D110ZA22L.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 19 reviews

    Technical Specifications for 100-D110ZA22L

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D110ZA22L
Product TypeContactor
Coil TypeConventional
Current Rating110 Amps
Control Voltage220 Volts DC
Poles3
MountingPanel
Protection RatingIP00
NC Auxiliary Contacts2
NO Auxiliary Contacts2
ApprovalsIEC, CSA, UL
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D110ZA22L
Product TypeContactor
Coil TypeConventional
Current Rating110 Amps
Control Voltage220 Volts DC
Poles3
MountingPanel
Protection RatingIP00
NC Auxiliary Contacts2
NO Auxiliary Contacts2
ApprovalsIEC, CSA, UL
s

About 100-D110ZA22L

The Allen-Bradley 100-D110ZA22L contactor is an IEC 100 and Bulletin 100-D contactor. The operating current rating of this contactor is 110 Amps. The 100-D110ZA22L contactor has 2 NC and 2 NO auxiliary contacts in addition to its 3 main contacts. One of the NC contacts on the contactor is a late break contact. The conventional coil on the contactor is rated for 220 Volts DC. The environmental specifications for 100-D series contactors include 2000 meters of maximum altitude for the installation site, a -20 to 80 degrees Celsius storage temperature range, and a -25 to 60 degrees Celsius operating temperature range. The current carrying capacity of the 100-D110ZA22L contactor derates by 15% for a 10 degrees Celsius temperature increase beyond the maximum recommended operating temperature, which is 60 degrees Celsius. The protection category of the 100-D110ZA22L contactor is IP 00 and the contactor can only be panel mounted.



Optional accessories that can be ordered for the Allen-Bradley 100-D110ZA22L contactor include side-mounted auxiliary contacts, surge suppressors, IP 20 rated terminal blocks, connecting components, and electrical/mechanical interlocks. The Bulletin 100-D contactors are approved by the IEC, CSA, and UL standards. The 100-D110ZA22L contactor is a 3-pole contactor that is made from environmentally friendly materials. The contactor and related machinery must be switched off before any maintenance is performed. Any work on the contactor should be carried out by trained personnel who know the relevant safety precautions and possess the necessary safety training and tools. For reliable and long-term contactor operation, only original Allen-Bradley spare parts should be used during contactor maintenance. The 100-D110ZA22L contactor needs to be powered off before the arc-chute can be removed. Energizing the contactor coil leads to the mechanical locking of the arc chute.



Repair Services for 100-D110ZA22L

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D110ZA22L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-D110ZA22L

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-D110ZA22L

Resolutions For 100-D110ZA22L

About

Technical Specifications for 100-D110ZA22L

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D110ZA22L
Product TypeContactor
Coil TypeConventional
Current Rating110 Amps
Control Voltage220 Volts DC
Poles3
MountingPanel
Protection RatingIP00
NC Auxiliary Contacts2
NO Auxiliary Contacts2
ApprovalsIEC, CSA, UL
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D110ZA22L
Product TypeContactor
Coil TypeConventional
Current Rating110 Amps
Control Voltage220 Volts DC
Poles3
MountingPanel
Protection RatingIP00
NC Auxiliary Contacts2
NO Auxiliary Contacts2
ApprovalsIEC, CSA, UL

About 100-D110ZA22L

The Allen-Bradley 100-D110ZA22L contactor is an IEC 100 and Bulletin 100-D contactor. The operating current rating of this contactor is 110 Amps. The 100-D110ZA22L contactor has 2 NC and 2 NO auxiliary contacts in addition to its 3 main contacts. One of the NC contacts on the contactor is a late break contact. The conventional coil on the contactor is rated for 220 Volts DC. The environmental specifications for 100-D series contactors include 2000 meters of maximum altitude for the installation site, a -20 to 80 degrees Celsius storage temperature range, and a -25 to 60 degrees Celsius operating temperature range. The current carrying capacity of the 100-D110ZA22L contactor derates by 15% for a 10 degrees Celsius temperature increase beyond the maximum recommended operating temperature, which is 60 degrees Celsius. The protection category of the 100-D110ZA22L contactor is IP 00 and the contactor can only be panel mounted.



Optional accessories that can be ordered for the Allen-Bradley 100-D110ZA22L contactor include side-mounted auxiliary contacts, surge suppressors, IP 20 rated terminal blocks, connecting components, and electrical/mechanical interlocks. The Bulletin 100-D contactors are approved by the IEC, CSA, and UL standards. The 100-D110ZA22L contactor is a 3-pole contactor that is made from environmentally friendly materials. The contactor and related machinery must be switched off before any maintenance is performed. Any work on the contactor should be carried out by trained personnel who know the relevant safety precautions and possess the necessary safety training and tools. For reliable and long-term contactor operation, only original Allen-Bradley spare parts should be used during contactor maintenance. The 100-D110ZA22L contactor needs to be powered off before the arc-chute can be removed. Energizing the contactor coil leads to the mechanical locking of the arc chute.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D110ZA22L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D110ZA22L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF