100-D110ZS22L

The Allen-Bradley 100-D110ZS22L contactor is a non-reversing contactor. It is part of the Allen-Bradley/Rockwell Automation Bulletin 100-D family of IEC contactors. This Motor Control System (MCS) contactor is a non-reversing DC contactor with a rated operational current of 110 Amps. The 100-D110ZS22L contactor is outfitted with a standard conventional DC coil with the coil code "ZS." The conventional coil on this model has a maximum coil voltage rating of 125 Volts DC. The DC coil's pick-up power consumption is 265 Watts, and its hold-in power consumption rating is 6 Watts. The 100-D110ZS22L non-reversing IEC contactor has three main contact poles and four auxiliary contacts. The auxiliary contacts are made up of two normally open contacts and two normally closed contacts.

The Allen-Bradley 100-D110ZS22L contactor has an operational current rating of 160 Amps for AC-1 utilization category applications. The contactor's output power ratings at 60 Hertz for switching 3-phase motors are 40 Horsepower at 200/230 Volts AC, 75 Horsepower at 460 Volts AC, and 100 Horsepower at 575 Volts AC. The rated isolation voltage of the unit per the IEC standards is 1000 Volts, at which its operational power rating is 55 kilowatts. The unit requires an ambient temperature range of -25 to 60 degrees Celsius for normal operation. As per the IEC 60947-4-1 standards, the 100-D110ZS22L contactor has a Type 1 short circuit coordination rating or SCCR of 250 Amps at 690 Volts and a Type 2 SCCR of 200 Amps at 400 and 690 Volts. The 100-D110ZS22L contactor is a compact device that measures 120 millimeters wide, 170 millimeters tall, and 156 millimeters deep. This contactor’s width is increased if additional auxiliary contacts are used with the conventional DC coil.