DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 100-D115B11 contactor from Allen-Bradley is an IEC 100 Contactors series non-reversing contactor. It can operate with conventional or electronic coils and with AC or DC voltage. The 100-D115B11 contactor’s current rating range is 115 to 860 Amps.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 100-D115B11. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Allen-Bradley/Rockwell Automation |
Series | IEC 100 Contactors |
Part Number | 100-D115B11 |
Product Type | Contactor |
Contactor Type | Non-Reversing |
Conventional Coils | Supported |
Electronic Coils | Supported |
Voltage Type | AC or DC |
Current Rating | 115 to 860 Amps |
Number of Power Poles | 3 |
Manufacturer | Allen-Bradley/Rockwell Automation |
Series | IEC 100 Contactors |
Part Number | 100-D115B11 |
Product Type | Contactor |
Contactor Type | Non-Reversing |
Conventional Coils | Supported |
Electronic Coils | Supported |
Voltage Type | AC or DC |
Current Rating | 115 to 860 Amps |
Number of Power Poles | 3 |
The Allen-Bradley/Rockwell Automation 100-D115B11 contactor has been designed and manufactured as part of the Allen-Bradley IEC 100 Contactors series. It is an environmentally friendly and non-reversing type of contactor. The 100-D115B11 contactor can be panel mounted but not DIN Rail mounted, and it supports screw terminals that are thru-hole threaded screw terminals, but not spring terminals. Its current rating is from 115 to 860 Amps. The side-mounted auxiliary contacts that are built into the 100-D115B11 contactor include 1 NO or normally open contact and 1 NC or normally closed contact. Additional optional contacts can also be side mounted on this contactor. The 100-D115B11 contactor also has 3 power poles. It has been UL, CSA, IEC, CCC, and CE certified.
The Allen-Bradley/Rockwell Automation 100-D115B11 IEC 100 series contactor supports both AC operating voltage and DC operating voltage, and it can operate with different voltage ranges depending on the application and depending on whether it has conventional coils or electronic coils. When the 100-D115B11 contactor has conventional coils, its DC operating voltage range is 24 to 255 Volts DC, and its supported AC operating voltage ranges are 24 to 550 Volts AC with a frequency of 50 Hertz, 24 to 600 Volts AC with a frequency of 60 Hertz, and 100 to 277 Volts AC with a frequency of 50 to 60 Hertz. When the 100-D115B11 contactor has electronic coils instead, its DC operating voltage range is 24 to 255 Volts DC and its AC operating voltage range is 24 to 500 Volts AC with a frequency of 50 to 60 Hertz.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 100-D115B11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Allen-Bradley/Rockwell Automation |
Series | IEC 100 Contactors |
Part Number | 100-D115B11 |
Product Type | Contactor |
Contactor Type | Non-Reversing |
Conventional Coils | Supported |
Electronic Coils | Supported |
Voltage Type | AC or DC |
Current Rating | 115 to 860 Amps |
Number of Power Poles | 3 |
Manufacturer | Allen-Bradley/Rockwell Automation |
Series | IEC 100 Contactors |
Part Number | 100-D115B11 |
Product Type | Contactor |
Contactor Type | Non-Reversing |
Conventional Coils | Supported |
Electronic Coils | Supported |
Voltage Type | AC or DC |
Current Rating | 115 to 860 Amps |
Number of Power Poles | 3 |
The Allen-Bradley/Rockwell Automation 100-D115B11 contactor has been designed and manufactured as part of the Allen-Bradley IEC 100 Contactors series. It is an environmentally friendly and non-reversing type of contactor. The 100-D115B11 contactor can be panel mounted but not DIN Rail mounted, and it supports screw terminals that are thru-hole threaded screw terminals, but not spring terminals. Its current rating is from 115 to 860 Amps. The side-mounted auxiliary contacts that are built into the 100-D115B11 contactor include 1 NO or normally open contact and 1 NC or normally closed contact. Additional optional contacts can also be side mounted on this contactor. The 100-D115B11 contactor also has 3 power poles. It has been UL, CSA, IEC, CCC, and CE certified.
The Allen-Bradley/Rockwell Automation 100-D115B11 IEC 100 series contactor supports both AC operating voltage and DC operating voltage, and it can operate with different voltage ranges depending on the application and depending on whether it has conventional coils or electronic coils. When the 100-D115B11 contactor has conventional coils, its DC operating voltage range is 24 to 255 Volts DC, and its supported AC operating voltage ranges are 24 to 550 Volts AC with a frequency of 50 Hertz, 24 to 600 Volts AC with a frequency of 60 Hertz, and 100 to 277 Volts AC with a frequency of 50 to 60 Hertz. When the 100-D115B11 contactor has electronic coils instead, its DC operating voltage range is 24 to 255 Volts DC and its AC operating voltage range is 24 to 500 Volts AC with a frequency of 50 to 60 Hertz.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 100-D115B11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 100-D115B11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.