Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors 100-D115EN00

Product image is representative; revision or series may vary. Contact us to request a specific version.

100-D115EN00

|
Need a Specific Revision?

The Allen-Bradley IEC 100 series 100-D115EN00 contactor is a 3-pole contactor. It has a 115 Amps current rating. No auxiliary contacts are available on the 100-D115EN00 contactor.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 100-D115EN00

ManufacturerAllen Bradley
Product TypeContactor
Product LineIEC 100 Contactors
Part Number100-D115EN00
Weight3.00 lbs (1.36 kg)
Coil TypeElectronic
Control Voltage380 to 500 Volts AC
Current Rating115 Amps
Poles3
MountingPanel
Maximum Height2000 meters
Protection ClassIP00
Auxiliary ContactsNone
Impulse Withstand Voltage12 kilovolts
Request a Repair

The Allen-Bradley 100-D115EN00 contactor is an IEC 100 and Bulletin 100-D series contactor. The coil on the contactor is electronic and it is rated for 380 to 500 Volts AC at 50/60 Hertz. The current rating of the 100-D115EN00 contactor is 115 Amps. There are no auxiliary contacts on this contactor. At 40 degrees Celsius, the rated operational current ratings for single-phase AC voltage are 250 Amps at 500, 690, or 1000 Volts AC. The contactor’s kilowatt output power ratings at 40 degrees Celsius for single-phase AC voltage are 100 kilowatts at 230 Volts, 180 kilowatts at 415 Volts, 299 kilowatts at 690 Volts, and 433 kilowatts at 1000 Volts. At 60 degrees Celsius, the rated operational current ratings for single-phase AC voltage are 210 Amps at 500, 690, or 1000 Volts AC.

The kilowatt output power ratings at 60 degrees Celsius for single-phase AC voltage with the Allen-Bradley Bulletin 100-D series 100-D115EN00 contactor are 84 kilowatts at 230 Volts, 145 kilowatts at 400 Volts, 251 kilowatts at 690 Volts, and 364 kilowatts at 1000 Volts. At 60 degrees Celsius, the current ratings for switching 3-phase motors are 115 Amps at 230, 240, 400, 500, and 690 Volts and 46 Amps at 1000 Volts. At 60 degrees Celsius, the power ratings for switching 3-phase motors are 37 kilowatts at 230 Volts, 64 kilowatts at 400 Volts, and 111 kilowatts at 690 Volts. The rated impulse withstand voltage for the 100-D115EN00 contactor is 12 kilovolts. Operation at the rated voltage requires a -25 to 60 degrees Celsius ambient temperature range. The protection class of the 100-D115EN00 contactor is IP 00.