The 100-D115H00 contactor is a large frame non-reversing IEC contactor from the Allen-Bradley Bulletin 100-D series. It is an MCS (Motor Control System) non-reversing contactor that features a conventional AC coil. The conventional coil on the 100-D115H00 contactor has low pick-up and holding power consumption ratings of 650 Volts-Amps and 50 Volts-Amps, respectively. This non-reversing IEC contactor unit has a maximum current rating of 115 Amps at 400 Volts AC. The 100-D115H00 contactor's conventional coil has a rated control voltage of 208 Volts AC and an operating frequency of 60 Hertz. This 3-phase contactor module comes with three power poles which are the main contacts, but no auxiliary contacts. If additional auxiliary contacts are required, the unit also allows for the side-mounting of external auxiliary contact blocks.

The Allen-Bradley Bulletin 100-D 100-D115H00 MCS D contactor has a rated operating current of 250 Amps for AC-1 utilization category applications at 40 degrees Celsius. The unit's 3-phase output power rating at 50 Hertz is 37 kilowatts at 230 Volts, 66 kilowatts at 415 Volts, 80 kilowatts at 500 Volts, and 110 kilowatts at 690 Volts. The 100-D115H00 contactor unit has a maximum rated isolation voltage of 1000 Volts. The minimum recommended conductor diameter for the contactor's main contact terminal is 8.3 millimeters, with a recommended tightening torque of 22 N-m. The 100-D115H00 contactor module operates at full power in a temperature range of -25 to 60 degrees Celsius. According to the IEC 60529 standards, the contactor's enclosure has an IP00 general protection class rating and it provides protection against accidental finger or hand contact. This contactor model has replacement parts available, including arch chambers, main contacts, and coils.