100-D115J11 | Allen Bradley PLC IEC 100 Contactors

100-D115J11

100-D115J11

Description:

The Allen-Bradley 100-D115J11 contactor is a non-reversing IEC contactor from the Bulletin 100-D product line. It has an operating current rating of 115 Amps (AC-3). The unit has a conventional AC coil with a control voltage rating of 24 Volts at 60 Hertz. It has three main poles and two auxiliary contacts (1 NO, 1 NC).

Rated 4.9 with 6 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-D115J11

Add more parts to quote

Description:

The Allen-Bradley 100-D115J11 contactor is a non-reversing IEC contactor from the Bulletin 100-D product line. It has an operating current rating of 115 Amps (AC-3). The unit has a conventional AC coil with a control voltage rating of 24 Volts at 60 Hertz. It has three main poles and two auxiliary contacts (1 NO, 1 NC).


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-D115J11.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 6 reviews

    Technical Specifications for 100-D115J11

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D115J11
DescriptionNon-Reversing IEC Contactor
Type of ContactorMCS Contactor
Product LineBulletin 100-D
Rated Operating Current 115 Amps (AC-3)
AC-1 Current Rating 250 A (690V)
Coil TypeConventional AC Coil
Coil Voltage24 Volts AC
Operating Frequency 60 Hz
Number of Poles3
Auxiliary Contacts1 NO, 1 NC
Operational Power Rating 63 kW at 400V AC, 66 kW at 415V AC, up to 110 kW at 690V AC (50 Hertz )
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D115J11
DescriptionNon-Reversing IEC Contactor
Type of ContactorMCS Contactor
Product LineBulletin 100-D
Rated Operating Current 115 Amps (AC-3)
AC-1 Current Rating 250 A (690V)
Coil TypeConventional AC Coil
Coil Voltage24 Volts AC
Operating Frequency 60 Hz
Number of Poles3
Auxiliary Contacts1 NO, 1 NC
Operational Power Rating 63 kW at 400V AC, 66 kW at 415V AC, up to 110 kW at 690V AC (50 Hertz )
s

About 100-D115J11

The Allen-Bradley 100-D115J11 contactor is a non-reversing MCS contactor. It is a large frame magnetic contactor from the Bulletin 100-D product line. The IEC-certified 100-D115J11 non-reversing contactor is designed primarily for demanding industrial electrical applications such as HVAC, 3-phase motor, elevator, and power transformer applications. This non-reversing contactor from Allen-Bradley has an operational current rating (AC-3) of 115 Amps at 400 Volts AC and an ambient temperature of 60 degrees Celsius. The AC-1 operating current rating of the 100-D115J11 contactor is 250 Amps at 690 Volts AC and at 40 degrees Celsius. The unit comes equipped with a conventional coil with an AC voltage rating of 24 Volts and a frequency rating of 60 Hertz. The coil supports 310 Watts of rated pick-up power and 10 Watts of rated hold-in power consumption. 



The Allen-Bradley Bulletin 100-D 100-D115J11 non-reversing IEC contactor has three main contact poles and two auxiliary contacts. The 100-D115J11 contactor specifically has one normally open (N.O.) and one normally closed (N.C.) auxiliary contact. If more auxiliary contacts are required, they can be added by using external optional auxiliary contact blocks, which can be ordered separately. This non-reversing contactor module can operate at 63 kilowatts with a 400-Volt motor, 66 kilowatts with a 415-Volt motor, and at up to 110 kilowatts with a 690-Volt motor at 50 Hertz operating frequency. Additionally, the Horsepower output of the coil is rated at 40 Horsepower at 230 Volts AC, 75 Horsepower at 460 Volts, and 100 Horsepower maximum at 575 Volts. The 100-D115J11 non-reversing IEC contactor complies with the CSA, UL, and CCC standards, and it is CE marked and SUVA certified. This three-phase non-reversing contactor has through-hole and threaded connection screw terminals.



Repair Services for 100-D115J11

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D115J11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-D115J11

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-D115J11

Resolutions For 100-D115J11

About

Technical Specifications for 100-D115J11

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D115J11
DescriptionNon-Reversing IEC Contactor
Type of ContactorMCS Contactor
Product LineBulletin 100-D
Rated Operating Current 115 Amps (AC-3)
AC-1 Current Rating 250 A (690V)
Coil TypeConventional AC Coil
Coil Voltage24 Volts AC
Operating Frequency 60 Hz
Number of Poles3
Auxiliary Contacts1 NO, 1 NC
Operational Power Rating 63 kW at 400V AC, 66 kW at 415V AC, up to 110 kW at 690V AC (50 Hertz )
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D115J11
DescriptionNon-Reversing IEC Contactor
Type of ContactorMCS Contactor
Product LineBulletin 100-D
Rated Operating Current 115 Amps (AC-3)
AC-1 Current Rating 250 A (690V)
Coil TypeConventional AC Coil
Coil Voltage24 Volts AC
Operating Frequency 60 Hz
Number of Poles3
Auxiliary Contacts1 NO, 1 NC
Operational Power Rating 63 kW at 400V AC, 66 kW at 415V AC, up to 110 kW at 690V AC (50 Hertz )

About 100-D115J11

The Allen-Bradley 100-D115J11 contactor is a non-reversing MCS contactor. It is a large frame magnetic contactor from the Bulletin 100-D product line. The IEC-certified 100-D115J11 non-reversing contactor is designed primarily for demanding industrial electrical applications such as HVAC, 3-phase motor, elevator, and power transformer applications. This non-reversing contactor from Allen-Bradley has an operational current rating (AC-3) of 115 Amps at 400 Volts AC and an ambient temperature of 60 degrees Celsius. The AC-1 operating current rating of the 100-D115J11 contactor is 250 Amps at 690 Volts AC and at 40 degrees Celsius. The unit comes equipped with a conventional coil with an AC voltage rating of 24 Volts and a frequency rating of 60 Hertz. The coil supports 310 Watts of rated pick-up power and 10 Watts of rated hold-in power consumption. 



The Allen-Bradley Bulletin 100-D 100-D115J11 non-reversing IEC contactor has three main contact poles and two auxiliary contacts. The 100-D115J11 contactor specifically has one normally open (N.O.) and one normally closed (N.C.) auxiliary contact. If more auxiliary contacts are required, they can be added by using external optional auxiliary contact blocks, which can be ordered separately. This non-reversing contactor module can operate at 63 kilowatts with a 400-Volt motor, 66 kilowatts with a 415-Volt motor, and at up to 110 kilowatts with a 690-Volt motor at 50 Hertz operating frequency. Additionally, the Horsepower output of the coil is rated at 40 Horsepower at 230 Volts AC, 75 Horsepower at 460 Volts, and 100 Horsepower maximum at 575 Volts. The 100-D115J11 non-reversing IEC contactor complies with the CSA, UL, and CCC standards, and it is CE marked and SUVA certified. This three-phase non-reversing contactor has through-hole and threaded connection screw terminals.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D115J11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D115J11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF