100-D115N00 | Allen Bradley PLC IEC 100 Contactors

100-D115N00

100-D115N00

Description:

The Allen-Bradley 100-D115N00 contactor is designed as a member of the Bulletin 100-D line within the IEC 100 Contactors series. It has 3 main contacts, no auxiliary contacts, and a 380 to 400 Volts AC-rated conventional coil at 50 Hertz. The 100-D115N00 contactor can operate at a temperature of up to 70 degrees Celsius.

Rated 4.8 with 7 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-D115N00

Add more parts to quote

Description:

The Allen-Bradley 100-D115N00 contactor is designed as a member of the Bulletin 100-D line within the IEC 100 Contactors series. It has 3 main contacts, no auxiliary contacts, and a 380 to 400 Volts AC-rated conventional coil at 50 Hertz. The 100-D115N00 contactor can operate at a temperature of up to 70 degrees Celsius.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-D115N00.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 7 reviews

    Technical Specifications for 100-D115N00

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D115N00
Product TypeIEC Contactor
Contactor TypeNon-reversing Contactor
Number of Poles3
Number of Auxiliary ContactsNone
Coil TypeConventional
Coil Voltage380 to 400 Volts AC at 50 Hertz
Operating Temperature-25 to 60 degrees Celsius
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D115N00
Product TypeIEC Contactor
Contactor TypeNon-reversing Contactor
Number of Poles3
Number of Auxiliary ContactsNone
Coil TypeConventional
Coil Voltage380 to 400 Volts AC at 50 Hertz
Operating Temperature-25 to 60 degrees Celsius
s

About 100-D115N00

The 100-D115N00 contactor is an AC-powered 3-pole contactor which has been designed by Allen-Bradley/Rockwell Automation as a member of the Bulletin 100-D subseries in the Allen-Bradley IEC 100 Contactors series. The 100-D115N00 3-pole contactor is one of the most basic contactor models available from the Bulletin 100-D subseries because it only has 3 contacts and it uses a conventional coil. The conventional coil in the 100-D115N00 3-pole contactor supports a voltage range of 380 to 400 Volts AC at a rated frequency of 50 Hertz. The 3 poles in this contactor are power poles or main contact points, and there are no built-in auxiliary contacts. If the 100-D115N00 3-pole contactor needs auxiliary contacts, they must be ordered from the IEC 100 and Bulletin 100-D accessories catalog and mounted on the sides of the contactor.



 



The ambient operating temperature range for the Allen-Bradley/Rockwell Automation Bulletin 100-D 100-D115N00 3-pole contactor is from -25 to 60 degrees Celsius or -13 to 140 degrees Fahrenheit. The storage temperature range for this contactor is from -40 to 80 degrees Celsius or -40 to 176 degrees Fahrenheit. In some circumstances, this contactor can operate at ambient temperatures of up to 70 degrees Celsius or 158 degrees Fahrenheit, but it can only do so with a 15% current reduction. The 100-D115N00 3-pole contactor has been certified by a variety of industrial standards, including the CE Mark, CCC, cULus list, UL 508, and IEC standards. This contactor is designed so that it is protected against accidental contact, which means that the users are not at risk of touching its hazardous parts by accident and suffering from potentially severe injuries.



Repair Services for 100-D115N00

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D115N00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-D115N00

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-D115N00

Resolutions For 100-D115N00

About

Technical Specifications for 100-D115N00

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D115N00
Product TypeIEC Contactor
Contactor TypeNon-reversing Contactor
Number of Poles3
Number of Auxiliary ContactsNone
Coil TypeConventional
Coil Voltage380 to 400 Volts AC at 50 Hertz
Operating Temperature-25 to 60 degrees Celsius
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D115N00
Product TypeIEC Contactor
Contactor TypeNon-reversing Contactor
Number of Poles3
Number of Auxiliary ContactsNone
Coil TypeConventional
Coil Voltage380 to 400 Volts AC at 50 Hertz
Operating Temperature-25 to 60 degrees Celsius

About 100-D115N00

The 100-D115N00 contactor is an AC-powered 3-pole contactor which has been designed by Allen-Bradley/Rockwell Automation as a member of the Bulletin 100-D subseries in the Allen-Bradley IEC 100 Contactors series. The 100-D115N00 3-pole contactor is one of the most basic contactor models available from the Bulletin 100-D subseries because it only has 3 contacts and it uses a conventional coil. The conventional coil in the 100-D115N00 3-pole contactor supports a voltage range of 380 to 400 Volts AC at a rated frequency of 50 Hertz. The 3 poles in this contactor are power poles or main contact points, and there are no built-in auxiliary contacts. If the 100-D115N00 3-pole contactor needs auxiliary contacts, they must be ordered from the IEC 100 and Bulletin 100-D accessories catalog and mounted on the sides of the contactor.



 



The ambient operating temperature range for the Allen-Bradley/Rockwell Automation Bulletin 100-D 100-D115N00 3-pole contactor is from -25 to 60 degrees Celsius or -13 to 140 degrees Fahrenheit. The storage temperature range for this contactor is from -40 to 80 degrees Celsius or -40 to 176 degrees Fahrenheit. In some circumstances, this contactor can operate at ambient temperatures of up to 70 degrees Celsius or 158 degrees Fahrenheit, but it can only do so with a 15% current reduction. The 100-D115N00 3-pole contactor has been certified by a variety of industrial standards, including the CE Mark, CCC, cULus list, UL 508, and IEC standards. This contactor is designed so that it is protected against accidental contact, which means that the users are not at risk of touching its hazardous parts by accident and suffering from potentially severe injuries.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D115N00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D115N00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF