DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 100-D115T00 contactor is a 3-pole contactor from the Bulletin 100-D series. It has 3 main contacts, a conventional coil, and an IP 00 environmental protection rating. The 100-D115T00 contactor’s coil voltage rating is 240 Volts AC at 50 Hertz.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 100-D115T00. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | IEC 100 Contactors |
Part Number | 100-D115T00 |
Product Type | IEC Contactor |
Number of Poles | 3 |
Auxiliary Contacts | None |
Coil Type | Conventional |
Coil Voltage | 240 Volts AC at 50 Hertz |
Environmental Protection Rating | IP 00 |
Mounting Base | Panel |
Brand | Allen-Bradley / Rockwell Automation |
Series | IEC 100 Contactors |
Part Number | 100-D115T00 |
Product Type | IEC Contactor |
Number of Poles | 3 |
Auxiliary Contacts | None |
Coil Type | Conventional |
Coil Voltage | 240 Volts AC at 50 Hertz |
Environmental Protection Rating | IP 00 |
Mounting Base | Panel |
The 100-D115T00 3-pole contactor is an IEC type of 3-pole contactor that has been designed by Allen-Bradley. It is part of the IEC 100 and Bulletin 100-D series of contactors. The electronic coil that is used by the 100-D115T00 3-pole contactor is a conventional AC coil. The voltage rating of this conventional coil is 240 Volts AC with 50 Hertz of frequency. The 100-D115T00 3-pole contactor cannot be mounted on DIN Rail, but it supports panel mounting. It also does not come with auxiliary contacts that are built into it like some other Bulletin 100-D contactor models do. The only contacts that the 100-D115T00 3-pole contactor comes with are 3 power poles. The 3 power pole contacts are used to connect the contactor to its power source for operation.
The Allen-Bradley 100-D115T00 3-pole contactor from the IEC 100 and Bulletin 100-D series can be stored in a temperature range from -40 to 80 degrees Celsius and it can operate normally in a temperature range from -25 to 60 degrees Celsius. If the current rating of the 100-D115T00 3-pole contactor is reduced by 15%, this contactor can operate at temperatures between 60 and 70 degrees Celsius. This contactor has been designed to protect the fingers and hands of its users so that they will not be at risk of injury from any of its hazardous components, but its general environmental protection rating is only IP 00, which means that it is not strongly protected from dust, water, or other liquids. The protection rating of the 100-D115T00 3-pole contactor can be increased to IP 10 or IP 20 with contactor covers and frame terminal blocks.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 100-D115T00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | IEC 100 Contactors |
Part Number | 100-D115T00 |
Product Type | IEC Contactor |
Number of Poles | 3 |
Auxiliary Contacts | None |
Coil Type | Conventional |
Coil Voltage | 240 Volts AC at 50 Hertz |
Environmental Protection Rating | IP 00 |
Mounting Base | Panel |
Brand | Allen-Bradley / Rockwell Automation |
Series | IEC 100 Contactors |
Part Number | 100-D115T00 |
Product Type | IEC Contactor |
Number of Poles | 3 |
Auxiliary Contacts | None |
Coil Type | Conventional |
Coil Voltage | 240 Volts AC at 50 Hertz |
Environmental Protection Rating | IP 00 |
Mounting Base | Panel |
The 100-D115T00 3-pole contactor is an IEC type of 3-pole contactor that has been designed by Allen-Bradley. It is part of the IEC 100 and Bulletin 100-D series of contactors. The electronic coil that is used by the 100-D115T00 3-pole contactor is a conventional AC coil. The voltage rating of this conventional coil is 240 Volts AC with 50 Hertz of frequency. The 100-D115T00 3-pole contactor cannot be mounted on DIN Rail, but it supports panel mounting. It also does not come with auxiliary contacts that are built into it like some other Bulletin 100-D contactor models do. The only contacts that the 100-D115T00 3-pole contactor comes with are 3 power poles. The 3 power pole contacts are used to connect the contactor to its power source for operation.
The Allen-Bradley 100-D115T00 3-pole contactor from the IEC 100 and Bulletin 100-D series can be stored in a temperature range from -40 to 80 degrees Celsius and it can operate normally in a temperature range from -25 to 60 degrees Celsius. If the current rating of the 100-D115T00 3-pole contactor is reduced by 15%, this contactor can operate at temperatures between 60 and 70 degrees Celsius. This contactor has been designed to protect the fingers and hands of its users so that they will not be at risk of injury from any of its hazardous components, but its general environmental protection rating is only IP 00, which means that it is not strongly protected from dust, water, or other liquids. The protection rating of the 100-D115T00 3-pole contactor can be increased to IP 10 or IP 20 with contactor covers and frame terminal blocks.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 100-D115T00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 100-D115T00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.