The 100-D115T11 contactor is an Allen-Bradley Bulletin 100-D contactor that has a conventional coil. The voltage rating of this contactor’s conventional coil is 240 Volts AC, and the frequency rating is 50 Hertz. This contactor cannot be connected to an electronic interface or mounted on a DIN Rail. However, it can be mounted on a panel, and it has 2 auxiliary contacts in addition to its 3 main contacts. The auxiliary contacts are 1 normally closed contact and 1 normally open contact. More auxiliary contacts can be added to the 100-D115T11 contactor by mounting auxiliary contact blocks on its right and left sides. The 100-D115T11 contactor can be customized with several other optional accessories for different application needs. The available accessories include interlocks, terminal lugs, terminal shields, terminal shrouds, and labels.

Allen-Bradley recommends labeling the Bulletin 100-D 100-D115T11 contactor so that it is clearly identifiable within its system. The labels that are used for this contactor can be self-adhesive paper labels or they can be non-adhesive paper labels that are housed inside protective plastic tags or sleeves. Both types of labels can be easily written on or printed by the users and easily replaced when necessary. The mounting plate that is most suitable for mounting the 100-D115T11 contactor is made of galvanized steel. Interlocks can be used to connect the 100-D115T11 contactor to another contactor. The interlock can be mechanical and electrical or mechanical only, and it does not require any additional installation space. The 100-D115T11 contactor can operate at full capacity in a temperature range from -25 degrees Celsius to 60 degrees Celsius.