100-D115ZD22L | Allen Bradley PLC IEC 100 Contactors

100-D115ZD22L

100-D115ZD22L

Description:

The 100-D115ZD22L contactor is a non-reversing contactor with a DC coil. It is part of the Allen-Bradley Bulletin 100-D line of contactors. It is equipped with 3 main contacts, 2 normally open auxiliary contacts, and 1 normally closed auxiliary contact.

Rated 4.7 with 13 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-D115ZD22L

Add more parts to quote

Description:

The 100-D115ZD22L contactor is a non-reversing contactor with a DC coil. It is part of the Allen-Bradley Bulletin 100-D line of contactors. It is equipped with 3 main contacts, 2 normally open auxiliary contacts, and 1 normally closed auxiliary contact.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-D115ZD22L.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 13 reviews

    Technical Specifications for 100-D115ZD22L

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D115ZD22L
Product TypeIEC Contactor
Contactor TypeNon-reversing
Number of Poles3
Number of Normally Open Auxiliary Contacts2
Number of Normally Closed Auxiliary Contacts1
Coil Voltage110 Volts DC
Operating Temperature Range-25 to 60 degrees Celsius
Maximum Operating Temperature70 degrees Celsius
Storage Temperature Range-40 to 80 degrees Celsius
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D115ZD22L
Product TypeIEC Contactor
Contactor TypeNon-reversing
Number of Poles3
Number of Normally Open Auxiliary Contacts2
Number of Normally Closed Auxiliary Contacts1
Coil Voltage110 Volts DC
Operating Temperature Range-25 to 60 degrees Celsius
Maximum Operating Temperature70 degrees Celsius
Storage Temperature Range-40 to 80 degrees Celsius
s

About 100-D115ZD22L

The 100-D115ZD22L non-reversing contactor is a 3-pole type of non-reversing contactor with a DC-powered electronic coil. It is designed and made by Allen-Bradley/Rockwell Automation in the Allen-Bradley IEC 100 Contactors series and the Bulletin 100-D subseries. The 100-D115ZD22L non-reversing contactor is a non-reversing contactor because it cannot reverse the voltage or polarity of the motor that it operates with. Like most of the contactors from the Allen-Bradley Bulletin 100-D series, the 100-D115ZD22L non-reversing contactor has 3 main contacts and it also has auxiliary contacts, but while most other Bulletin 100-D series contactors have 1 normally open and 1 normally closed auxiliary contact, the 100-D115ZD22L non-reversing contactor has 2 normally open auxiliary contacts and 1 normally closed auxiliary contact.



 



The Allen-Bradley/Rockwell Automation 100-D115ZD22L non-reversing contactor from the Bulletin 100-D series operates with a conventional coil voltage rating of 110 Volts DC. Its IEC isolation voltage rating is 1000 Volts, its UL and CSA isolation voltage rating is 600 Volts, and its impulse voltage withstand rating is 12 kilovolts. The 100-D115ZD22L non-reversing contactor can operate at an ambient temperature as high as 70 degrees Celsius, but only in special application circumstances and only if its current rating has been reduced by 15%. For operation at full power, this contactor must be kept at an ambient temperature between -25 and 60 degrees Celsius. When it is not being used, the 100-D115ZD22L non-reversing contactor can be stored at an ambient temperature between -40 and 80 degrees Celsius. Allen-Bradley recommends labeling this contactor with one of the available customizable labels to make it easy to identify accurately.



Repair Services for 100-D115ZD22L

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D115ZD22L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-D115ZD22L

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-D115ZD22L

Resolutions For 100-D115ZD22L

About

Technical Specifications for 100-D115ZD22L

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D115ZD22L
Product TypeIEC Contactor
Contactor TypeNon-reversing
Number of Poles3
Number of Normally Open Auxiliary Contacts2
Number of Normally Closed Auxiliary Contacts1
Coil Voltage110 Volts DC
Operating Temperature Range-25 to 60 degrees Celsius
Maximum Operating Temperature70 degrees Celsius
Storage Temperature Range-40 to 80 degrees Celsius
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D115ZD22L
Product TypeIEC Contactor
Contactor TypeNon-reversing
Number of Poles3
Number of Normally Open Auxiliary Contacts2
Number of Normally Closed Auxiliary Contacts1
Coil Voltage110 Volts DC
Operating Temperature Range-25 to 60 degrees Celsius
Maximum Operating Temperature70 degrees Celsius
Storage Temperature Range-40 to 80 degrees Celsius

About 100-D115ZD22L

The 100-D115ZD22L non-reversing contactor is a 3-pole type of non-reversing contactor with a DC-powered electronic coil. It is designed and made by Allen-Bradley/Rockwell Automation in the Allen-Bradley IEC 100 Contactors series and the Bulletin 100-D subseries. The 100-D115ZD22L non-reversing contactor is a non-reversing contactor because it cannot reverse the voltage or polarity of the motor that it operates with. Like most of the contactors from the Allen-Bradley Bulletin 100-D series, the 100-D115ZD22L non-reversing contactor has 3 main contacts and it also has auxiliary contacts, but while most other Bulletin 100-D series contactors have 1 normally open and 1 normally closed auxiliary contact, the 100-D115ZD22L non-reversing contactor has 2 normally open auxiliary contacts and 1 normally closed auxiliary contact.



 



The Allen-Bradley/Rockwell Automation 100-D115ZD22L non-reversing contactor from the Bulletin 100-D series operates with a conventional coil voltage rating of 110 Volts DC. Its IEC isolation voltage rating is 1000 Volts, its UL and CSA isolation voltage rating is 600 Volts, and its impulse voltage withstand rating is 12 kilovolts. The 100-D115ZD22L non-reversing contactor can operate at an ambient temperature as high as 70 degrees Celsius, but only in special application circumstances and only if its current rating has been reduced by 15%. For operation at full power, this contactor must be kept at an ambient temperature between -25 and 60 degrees Celsius. When it is not being used, the 100-D115ZD22L non-reversing contactor can be stored at an ambient temperature between -40 and 80 degrees Celsius. Allen-Bradley recommends labeling this contactor with one of the available customizable labels to make it easy to identify accurately.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D115ZD22L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D115ZD22L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF