100-D115ZJ22L | Allen Bradley PLC IEC 100 Contactors

100-D115ZJ22L

100-D115ZJ22L

Description:

The Allen-Bradley 100-D115ZJ22L Bulletin 100-D IEC Contactor is a 3-pole contactor supplied with factory-installed terminal lugs and 4 auxiliary contacts. It is designed for panel mounting, and it can also be mounted on its back depending on the application configuration. The 100-D115ZJ22L Contactor is rated for 115 Amps of current with a 115 to 600 Volts AC voltage operating range, and a coil voltage of 24 Volts DC.

Rated 4.5 with 8 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-D115ZJ22L

Add more parts to quote

Description:

The Allen-Bradley 100-D115ZJ22L Bulletin 100-D IEC Contactor is a 3-pole contactor supplied with factory-installed terminal lugs and 4 auxiliary contacts. It is designed for panel mounting, and it can also be mounted on its back depending on the application configuration. The 100-D115ZJ22L Contactor is rated for 115 Amps of current with a 115 to 600 Volts AC voltage operating range, and a coil voltage of 24 Volts DC.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-D115ZJ22L.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 8 reviews

    Technical Specifications for 100-D115ZJ22L

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D115ZJ22L
DescriptionDC-Operated Contactor
Voltage Range115 to 600 Volts AC
Current Rating115 Amps
Coil TypeStandard DC Conventional Coil
Coil Voltage24 Volts DC
PLC InterfaceNone
Number of Poles3
Terminal TypeBolt Type
Auxiliary Contacts2 Normally Open (NO) and 2 Normally Closed (NC)
Protection ClassIP 20
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D115ZJ22L
DescriptionDC-Operated Contactor
Voltage Range115 to 600 Volts AC
Current Rating115 Amps
Coil TypeStandard DC Conventional Coil
Coil Voltage24 Volts DC
PLC InterfaceNone
Number of Poles3
Terminal TypeBolt Type
Auxiliary Contacts2 Normally Open (NO) and 2 Normally Closed (NC)
Protection ClassIP 20
s

About 100-D115ZJ22L

The 100-D115ZJ22L DC-Operated Bulletin 100-D 3-Phase Contactor from Allen-Bradley is a 3-pole, panel-mounted contactor designed for high load applications. The 100-D115ZJ22L Contactor has a very compact and flexible design that helps to save panel space. It also has a low switching rating, thereby saving energy and reducing costs. The 100-D115ZJ22L Contactor is a complete factory-assembled contactor with built-in surge suppression and other protective features. Terminal lugs, 2 normally open auxiliary contacts, 1 normally closed auxiliary contact, and 1 line-side normally closed auxiliary contacts are all supplied as factory-installed options. The 100-D115ZJ22L Contactor is rated for 115 Amps maximum carrying current at 400 Volts AC and for 250 Amps at 600 Volts AC. The 100-D115ZJ22L Contactor requires 3-phase voltage for operation. The operating voltage ranges from 115 Volts AC to 600 Volts AC.



The Allen-Bradley 100-D115ZJ22L Bulletin 100-D 3-Phase Contactor is rated for higher electrical and thermal switching ratings. It is designed to operate at an input value of up to 1000 Volt AC. The 100-D115ZJ22L Contactor has a switching power rating of 66 kilowatts at 400 Volts AC. The 100-D115ZJ22L Contactor supports panel mounting, and it can be mounted on its back with a control cabinet. The 100-D115ZJ22L Contactor is designed with flat-type terminals, and it is shipped with installation screws and washers for quick and easy field wiring. Optional ring lugs can be ordered for use on the end of the conductor. The 100-D115ZJ22L Contactor is supplied as a complete factory-assembled contactor. It comes with a conventional type of control coil with a 110 Volts AC to 120 Volts AC control voltage range and Class B electrical insulation. The 100-D115ZJ22L Contactor’s coil comes with a built-in surge suppression circuit and therefore does not require external user-supplied MOVs or an RC snubber network.



Repair Services for 100-D115ZJ22L

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D115ZJ22L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-D115ZJ22L

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-D115ZJ22L

Resolutions For 100-D115ZJ22L

About

Technical Specifications for 100-D115ZJ22L

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D115ZJ22L
DescriptionDC-Operated Contactor
Voltage Range115 to 600 Volts AC
Current Rating115 Amps
Coil TypeStandard DC Conventional Coil
Coil Voltage24 Volts DC
PLC InterfaceNone
Number of Poles3
Terminal TypeBolt Type
Auxiliary Contacts2 Normally Open (NO) and 2 Normally Closed (NC)
Protection ClassIP 20
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D115ZJ22L
DescriptionDC-Operated Contactor
Voltage Range115 to 600 Volts AC
Current Rating115 Amps
Coil TypeStandard DC Conventional Coil
Coil Voltage24 Volts DC
PLC InterfaceNone
Number of Poles3
Terminal TypeBolt Type
Auxiliary Contacts2 Normally Open (NO) and 2 Normally Closed (NC)
Protection ClassIP 20

About 100-D115ZJ22L

The 100-D115ZJ22L DC-Operated Bulletin 100-D 3-Phase Contactor from Allen-Bradley is a 3-pole, panel-mounted contactor designed for high load applications. The 100-D115ZJ22L Contactor has a very compact and flexible design that helps to save panel space. It also has a low switching rating, thereby saving energy and reducing costs. The 100-D115ZJ22L Contactor is a complete factory-assembled contactor with built-in surge suppression and other protective features. Terminal lugs, 2 normally open auxiliary contacts, 1 normally closed auxiliary contact, and 1 line-side normally closed auxiliary contacts are all supplied as factory-installed options. The 100-D115ZJ22L Contactor is rated for 115 Amps maximum carrying current at 400 Volts AC and for 250 Amps at 600 Volts AC. The 100-D115ZJ22L Contactor requires 3-phase voltage for operation. The operating voltage ranges from 115 Volts AC to 600 Volts AC.



The Allen-Bradley 100-D115ZJ22L Bulletin 100-D 3-Phase Contactor is rated for higher electrical and thermal switching ratings. It is designed to operate at an input value of up to 1000 Volt AC. The 100-D115ZJ22L Contactor has a switching power rating of 66 kilowatts at 400 Volts AC. The 100-D115ZJ22L Contactor supports panel mounting, and it can be mounted on its back with a control cabinet. The 100-D115ZJ22L Contactor is designed with flat-type terminals, and it is shipped with installation screws and washers for quick and easy field wiring. Optional ring lugs can be ordered for use on the end of the conductor. The 100-D115ZJ22L Contactor is supplied as a complete factory-assembled contactor. It comes with a conventional type of control coil with a 110 Volts AC to 120 Volts AC control voltage range and Class B electrical insulation. The 100-D115ZJ22L Contactor’s coil comes with a built-in surge suppression circuit and therefore does not require external user-supplied MOVs or an RC snubber network.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D115ZJ22L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D115ZJ22L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF