The Allen-Bradley 100-D115ZS22L contractor with built-in terminal lugs is a member of the Allen-Bradley IEC 100 and the 100-D series of industrial contactors and components. The 100-D115ZS22L contactor’s built-in set of terminal lugs is one of its most distinguishing features. They make it possible to connect the 100-D115ZS22L contactor to terminals in a system as soon as the contactor itself has been installed in the same system or in a nearby system. Other Allen-Bradley IEC 100 and 100-D series contactors cannot connect to terminals until they have been outfitted with external sets of terminal lugs. The 100-D115ZS22L contactor also has a conventional coil with a rated DC voltage of 125 Volts, and built-in auxiliary contacts.

The auxiliary contacts in the Allen-Bradley 100-D115ZS22L contactor from the IEC 100 and 100-D series with built-in terminal lugs are an NO or Normally Open contact and an NC or Normally Closed contact. More normally open or normally closed auxiliary contacts can be added on when auxiliary contact blocks are added to the contactor next to its built-in auxiliary contacts. This contactor also comes with 3 main contacts on top for making power connections. It is a non-reversing contactor that cannot reverse voltage polarity in a motor the way that reversing contactors can. The 100-D115ZS22L contactor is meant to be mounted on a metal panel, but not on DIN Rails. This contactor can operate with current ratings of 115 Amps at 400 Volts and 60 degrees Celsius and 250 Amps at 690 Volts and 40 degrees Celsius. The highest temperature that the 100-D115ZS22L contactor can operate at (with its current reduced by 15%) is 70 degrees Celsius.