100-D140EA00-DS1-B11L | Allen Bradley PLC IEC 100 Contactors

100-D140EA00-DS1-B11L

Rated 5 with 13 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

100-D140EA00-DS1-B11L

Description: The Allen-Bradley 100-D140EA00-DS1-B11L contactor is an IEC 100 and Bulletin 100-D contactor. It has 3 poles. The current rating of the 100-D140EA00-DS1-B11L contactor is 140 Amps.  
Available Now
Request a quote for 100-D140EA00-DS1-B11L

Description:

The Allen-Bradley 100-D140EA00-DS1-B11L contactor is an IEC 100 and Bulletin 100-D contactor. It has 3 poles. The current rating of the 100-D140EA00-DS1-B11L contactor is 140 Amps.

 

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-D140EA00-DS1-B11L.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 13 reviews

    Technical Specifications for 100-D140EA00-DS1-B11L

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D140EA00-DS1-B11L
Product TypeContactor
Coil TypeElectronic
Current Rating140 Amps
Control Voltage208 to 277 Volts AC
MountingPanel
NC Auxiliary Contacts1
NO Auxiliary Contacts1
Poles3
Maximum Altitude2000 Meters
Dimensions170 x 110.5 x 120 millimeters
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D140EA00-DS1-B11L
Product TypeContactor
Coil TypeElectronic
Current Rating140 Amps
Control Voltage208 to 277 Volts AC
MountingPanel
NC Auxiliary Contacts1
NO Auxiliary Contacts1
Poles3
Maximum Altitude2000 Meters
Dimensions170 x 110.5 x 120 millimeters
s

About 100-D140EA00-DS1-B11L

The Allen-Bradley 100-D140EA00-DS1-B11L contactor is a Bulletin 100-D contactor. It is designed for industrial applications. It features an electronic coil. The control voltage range for the electronic coil is 208 to 277 Volts AC at 50/60 Hertz. The current rating of the 100-D140EA00-DS1-B11L contactor is 140 Amps. There is one NC and one NO auxiliary contact on the contactor. The NC contact is a late-break contact. The contactor also has 2 low-energy switching contacts, one of which is an NC contact and one of which is an NO contact. The 100-D140EA00-DS1-B11L contactor is designed for indoor use only. The dimensions of the contactor are 170 x 110.5 x 120 millimeters. The isolation voltage rating is 1000 Volts per the IEC standard and 600 Volts per the UL/CSA standards. 



The working temperature range for the Allen-Bradley Bulletin 100-D series 100-D140EA00-DS1-B11L contactor is from -13 to 140 degrees Fahrenheit. The storage temperature range is from -40 to 176 degrees Fahrenheit. The auxiliary contacts on the 100-D140EA00-DS1-B11L contactor have an environmental protection rating of IP 20 which means that they are protected against solid objects up to 12 millimeters in size, but they are not protected against liquids. The contactor itself is IP 00 rated, which means that it must be installed indoors where it will be protected from large solid objects and from moisture. The contactor must only be commissioned and maintained by trained technicians. The technicians working on the 100-D140EA00-DS1-B11L contactor should read and understand all the operating instructions. Due to the presence of dangerous voltages, the contactor should be switched off and disconnected from the power before maintenance work.



Repair Services for 100-D140EA00-DS1-B11L

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D140EA00-DS1-B11L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-D140EA00-DS1-B11L

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-D140EA00-DS1-B11L

Resolutions For 100-D140EA00-DS1-B11L

About

Technical Specifications for 100-D140EA00-DS1-B11L

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D140EA00-DS1-B11L
Product TypeContactor
Coil TypeElectronic
Current Rating140 Amps
Control Voltage208 to 277 Volts AC
MountingPanel
NC Auxiliary Contacts1
NO Auxiliary Contacts1
Poles3
Maximum Altitude2000 Meters
Dimensions170 x 110.5 x 120 millimeters
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D140EA00-DS1-B11L
Product TypeContactor
Coil TypeElectronic
Current Rating140 Amps
Control Voltage208 to 277 Volts AC
MountingPanel
NC Auxiliary Contacts1
NO Auxiliary Contacts1
Poles3
Maximum Altitude2000 Meters
Dimensions170 x 110.5 x 120 millimeters

About 100-D140EA00-DS1-B11L

The Allen-Bradley 100-D140EA00-DS1-B11L contactor is a Bulletin 100-D contactor. It is designed for industrial applications. It features an electronic coil. The control voltage range for the electronic coil is 208 to 277 Volts AC at 50/60 Hertz. The current rating of the 100-D140EA00-DS1-B11L contactor is 140 Amps. There is one NC and one NO auxiliary contact on the contactor. The NC contact is a late-break contact. The contactor also has 2 low-energy switching contacts, one of which is an NC contact and one of which is an NO contact. The 100-D140EA00-DS1-B11L contactor is designed for indoor use only. The dimensions of the contactor are 170 x 110.5 x 120 millimeters. The isolation voltage rating is 1000 Volts per the IEC standard and 600 Volts per the UL/CSA standards. 



The working temperature range for the Allen-Bradley Bulletin 100-D series 100-D140EA00-DS1-B11L contactor is from -13 to 140 degrees Fahrenheit. The storage temperature range is from -40 to 176 degrees Fahrenheit. The auxiliary contacts on the 100-D140EA00-DS1-B11L contactor have an environmental protection rating of IP 20 which means that they are protected against solid objects up to 12 millimeters in size, but they are not protected against liquids. The contactor itself is IP 00 rated, which means that it must be installed indoors where it will be protected from large solid objects and from moisture. The contactor must only be commissioned and maintained by trained technicians. The technicians working on the 100-D140EA00-DS1-B11L contactor should read and understand all the operating instructions. Due to the presence of dangerous voltages, the contactor should be switched off and disconnected from the power before maintenance work.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D140EA00-DS1-B11L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D140EA00-DS1-B11L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF