100-D140EA11

The Allen-Bradley 100-D140EA11 Bulletin 100-D contactor is a 140 Amps-rated IEC contactor. The ambient specifications for the contactor include 2000 meters of maximum altitude for the installation site, a -13 to 140 degrees Fahrenheit operating temperature range, and a -40 to 176 degrees Fahrenheit storage temperature range. Compared to operation at 140 degrees Fahrenheit, the current carrying capacity of the 100-D140EA11 contactor must be reduced by 15% at 158 degrees Fahrenheit. The contactor complies with the climactic withstand specifications laid out in the IEC 60068-2-30 standards. The protection rating of the 100-D140EA11 contactor is IP 00. The contactor should be panel mounted inside a suitable switch cabinet where it will be protected from moisture and solid objects. The contactor complies with the resistance to shock specifications laid out in the IEC 60068-2-27 standards and with the resistance to vibration specifications laid out in the IEC 60068-2-6 standards.

The maximum rated power for single-phase applications with the Allen-Bradley 100-D140EA11 Bulletin 100-D contactor is 30 Horsepower at 230 Volts AC. The 100-D140EA11 contactor comes with an electronic coil which is rated for 208 to 277 Volts AC (50/60 Hertz). It belongs to the Bulletin 100-D series of contactors, which is a series of contactors that are made of environmentally friendly materials, and there are built-in PLC interfaces on the contactors with electronic coils. The 100-D140EA11 contactor is a 3-pole device with one normally-open and one normally-closed auxiliary contact along with the 3 poles. Optional side-mounted 2-pole external auxiliary contact blocks can be ordered for the contactor for certain applications. Other accessories that are available from Allen-Bradley for the 100-D140EA11 contactor include IP 20 rated terminal blocks, terminal shields, and terminal lugs. The Bulletin 100-D contactors like this one are certified and approved by the UL, CSA, IEC, CCC, and CE standards.