The 100-D140EG00 Bulletin 100-D contactor is an Allen-Bradley-manufactured non-reversing contactor. It has a maximum current rating of 140 Amps for the AC-3 utilization category applications. This Allen-Bradley contactor is equipped with an electronic coil with an integrated electronic interface or EI. The electronic coil on the 100-D140EG00 contactor has an AC control voltage rating of 200 Volts AC with operating frequency ratings of 50/50 Hertz. This MCS D non-reversing contactor is a 3-phase contactor with 3 power poles as main contacts. The unit does not have any auxiliary contacts, but external optionally mountable auxiliary contact blocks are available separately as add-on accessories for this contactor. The 100-D140EG00 non-reversing contactor can be installed by using a compatible mounting plate, but not a DIN Rail.

The Allen-Bradley 100-D140EG00 Bulletin 100-D contactor has a large frame size, and it measures 170 millimeters in height, 120 millimeters in width, and 156 millimeters in depth. The electronic AC coil on this non-reversing contactor unit has low pick-up and hold-in power consumption ratings of 240 Watts and 6 Watts, respectively. The built-in electronic interface operates on an external 24 Volts DC power supply and it has a current consumption rating of 15 milliamps. The 100-D140EG00 non-reversing contactor, including the EI and the coil, weighs approximately 3.8 kilograms. While in operation, the coil has a frequency rating of 50/60 Hertz and the operating temperature range is -25 to 60 degrees Celsius. At 40 degrees Celsius, the AC-1 current rating of the 100-D140EG00 contactor unit is 250 Amps. The load-carrying capacity of the contactor per the UL/CSA standards is 40 Horsepower at 200 Volts, 50 Horsepower at 230 Volts, 100 Horsepower at 460 Volts, and 125 Horsepower at 575 Volts. The unit has screw-type connection terminals.