100-D140EN00 | Allen Bradley PLC IEC 100 Contactors

100-D140EN00

Rated 4.7 with 15 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

100-D140EN00

Description: The Allen-Bradley Bulletin 100-D series 100-D140EN00 contactor has a voltage range of 115 to 600 Volts AC (and it can operate with 1000 Volts AC motors per the IEC standards) and a current rating of 140 Amps. It has an electronic AC coil with an integrated PLC interface. The 100-D140EN00 contactor supports the panel mounting option and can be installed on its back.
Available Now
Request a quote for 100-D140EN00

Description:

The Allen-Bradley Bulletin 100-D series 100-D140EN00 contactor has a voltage range of 115 to 600 Volts AC (and it can operate with 1000 Volts AC motors per the IEC standards) and a current rating of 140 Amps. It has an electronic AC coil with an integrated PLC interface. The 100-D140EN00 contactor supports the panel mounting option and can be installed on its back.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-D140EN00.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 15 reviews

    Technical Specifications for 100-D140EN00

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D140EN00
Product DescriptionAC-Operated Contactor
Voltage Range115 to 600 Volts AC
Current Rating140 Amps
Coil TypeElectronic AC Coil
Coil Voltage380 to 500 Volts AC
PLC InterfaceYes
Number of Poles3
Terminal TypeBolt Type
Auxiliary ContactsNone
Protection ClassIP 20
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D140EN00
Product DescriptionAC-Operated Contactor
Voltage Range115 to 600 Volts AC
Current Rating140 Amps
Coil TypeElectronic AC Coil
Coil Voltage380 to 500 Volts AC
PLC InterfaceYes
Number of Poles3
Terminal TypeBolt Type
Auxiliary ContactsNone
Protection ClassIP 20
s

About 100-D140EN00

The Allen-Bradley 100-D140EN00 Bulletin 100-D IEC AC-controlled contactor with an electronic AC coil with a compact design and a large frame. The 100-D140EN00 contactor is an AC-operated contactor that is designed for a wide range of applications. It features a significantly reduced size compared to standard contactors and it uses low levels of switching power to save energy and operation costs. When the 100-D140EN00 contactor is used with any of the Allen-Bradley Bulletin 193 electronic overload relays, it provides the most flexible and compact starter system available that meets the needs of demanding modern industrial applications. The 100-D140EN00 contactor is designed to meet many worldwide industrial standards and certifications such as the IEC, CSA, UL, CE, and c-UL-us standards.



The Allen-Bradley 100-D140EN00 Bulletin 100-D contactor has an electronic type AC-operated coil with a PLC interface circuit. This coil comes with an additional X5 connector and an S1 switch for the PLC interface. It has a wide operating range and a low pickup and a dropout range of 30 to 60% of the nominal voltage rating. The 100-D140EN00 contactor’s electronic coil has a control voltage range of 380 to 500 Volts AC at 50/60 Hertz coil frequency range. The 100-D140EN00 contactor can be wired directly to a 3-phase power source. It has an operating range of 115 to 600 Volts AC (50/60 Hertz), but it can also be operated at a voltage rating of up to 1000 Volts AC (per the IEC standard). The 100-D140EN00 contactor has a maximum switching rating of 100 Horsepower at 415 Volts AC (125 Horsepower at 575 Volts AC) and a maximum current rating of 140 Amps at 400 Volts AC (250 Amps at 690 Volts AC). The 100-D140EN00 contactor supports panel mounting, and it can also be mounted on its back.



Repair Services for 100-D140EN00

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D140EN00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-D140EN00

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-D140EN00

Resolutions For 100-D140EN00

About

Technical Specifications for 100-D140EN00

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D140EN00
Product DescriptionAC-Operated Contactor
Voltage Range115 to 600 Volts AC
Current Rating140 Amps
Coil TypeElectronic AC Coil
Coil Voltage380 to 500 Volts AC
PLC InterfaceYes
Number of Poles3
Terminal TypeBolt Type
Auxiliary ContactsNone
Protection ClassIP 20
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D140EN00
Product DescriptionAC-Operated Contactor
Voltage Range115 to 600 Volts AC
Current Rating140 Amps
Coil TypeElectronic AC Coil
Coil Voltage380 to 500 Volts AC
PLC InterfaceYes
Number of Poles3
Terminal TypeBolt Type
Auxiliary ContactsNone
Protection ClassIP 20

About 100-D140EN00

The Allen-Bradley 100-D140EN00 Bulletin 100-D IEC AC-controlled contactor with an electronic AC coil with a compact design and a large frame. The 100-D140EN00 contactor is an AC-operated contactor that is designed for a wide range of applications. It features a significantly reduced size compared to standard contactors and it uses low levels of switching power to save energy and operation costs. When the 100-D140EN00 contactor is used with any of the Allen-Bradley Bulletin 193 electronic overload relays, it provides the most flexible and compact starter system available that meets the needs of demanding modern industrial applications. The 100-D140EN00 contactor is designed to meet many worldwide industrial standards and certifications such as the IEC, CSA, UL, CE, and c-UL-us standards.



The Allen-Bradley 100-D140EN00 Bulletin 100-D contactor has an electronic type AC-operated coil with a PLC interface circuit. This coil comes with an additional X5 connector and an S1 switch for the PLC interface. It has a wide operating range and a low pickup and a dropout range of 30 to 60% of the nominal voltage rating. The 100-D140EN00 contactor’s electronic coil has a control voltage range of 380 to 500 Volts AC at 50/60 Hertz coil frequency range. The 100-D140EN00 contactor can be wired directly to a 3-phase power source. It has an operating range of 115 to 600 Volts AC (50/60 Hertz), but it can also be operated at a voltage rating of up to 1000 Volts AC (per the IEC standard). The 100-D140EN00 contactor has a maximum switching rating of 100 Horsepower at 415 Volts AC (125 Horsepower at 575 Volts AC) and a maximum current rating of 140 Amps at 400 Volts AC (250 Amps at 690 Volts AC). The 100-D140EN00 contactor supports panel mounting, and it can also be mounted on its back.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D140EN00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D140EN00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF