100-D140EN11

The 100-D140EN11 AC-Operated Contactor is a contactor from the Allen-Bradley Bulletin 100-D contactor series. The 100-D140EN11 Contactor has a compact design that offers significantly reduced weight and dimensions to save panel space. It has a low switching power rating that helps save energy usage. The 100-D140EN11 Contactor has an environmentally-friendly design that meets the RoHS standard. The 100-D140EN11 Contactor is also designed to meet the CSA, UL, and IEC industry standards as well as the CE and c-UL-us certifications. The 100-D140EN11 Contactor is a key component in a compact and flexible starter component system. The 100-D140EN11 Contactor has high electrical and thermal ratings, and it can be used in tough industrial conditions with high vibration and shock ratings. The 100-D140EN11 Contactor can support an IP 20 rated industrial protective enclosure, which is touch-proof and resistant to dust and smaller pieces of debris.

The Allen-Bradley Bulletin 100-D Series 100-D140EN11 AC-Operated Contactor has an AC-controlled electronic coil with a PLC interface. This coil offers a lower power pick-up and hold-in rating (30 to 60% of the average standard coil rating) as well as a wider operating voltage range than conventional coils can handle. The 100-D140EN11 Contactor has a coil voltage range of 380 Volts AC to 500 Volts AC at 50 to 60 Hertz frequency. It has 2 standard coil power terminals and an additional S1 switch circuit for the PLC interface. The 100-D140EN11 Contactor has 3 main contacts that support a bolt-in connection to the main power supply. It also has 2 factory-supplied side-mounted auxiliary contacts for wiring feedback. The 100-D140EN11 Contactor has a 3-phase AC power requirement for proper operation. It has an operating voltage range of 115 to 575 Volts AC (at 50 to 60 Hertz line frequency) and a maximum current rating of 140 Amps.