100-D140EP00

The Allen-Bradley 100-D140EP00 contactor is a Bulletin 100-D series 3-pole contactor with 140 Amps of rated operating current. It is designed for high-power industrial applications. Contactors are similar to relays in that they are used for switching electrical circuits on and off. A contactor is controlled by a coil that has a much lower power level than the switched circuit. The 100-D140EP00 contactor has an electronic coil. This coil is rated for 100 Volts AC. The contactor belongs to the Bulletin 100-D product family which includes contactors with conventional and electronic coils that can be ordered for a wide range of AC and DC operating voltages. There are no auxiliary contacts on this contactor. The height of the 100-D140EP00 contactor is 170 millimeters, the width of the contactor is 120 millimeters, and the depth of the contactor is 156 millimeters.

The environmental protection rating of the Allen-Bradley Bulletin 100-D series 100-D140EP00 contactor is IP 00. It is designed for indoor use and should be protected from dust, moisture, and other corrosive elements that could damage it. The isolation voltage rating for the 100-D140EP00 contactor according to the IEC standard is 1000 Volts. The contactor can withstand a 12 kilovolt impulse. Optimal contactor operation requires a -25 to 60 degrees Celsius ambient temperature range. Outside this temperature range, the current carrying capability of the contactor derates and will fall below the normal rated values. The contactor only supports panel mounting. It is certified by the UL, CCC, CE, and CSA standards. To avoid user injury and equipment damage, only experienced and qualified technicians should be involved in operation and maintenance of the contactor.