Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors 100-D140H11

Product image is representative; revision or series may vary. Contact us to request a specific version.

100-D140H11

|
Need a Specific Revision?

The Allen-Bradley 100-D140H11 contactor is a 3-pole Bulletin 100-D contactor. It has 2 auxiliary contacts. The current rating for the 100-D140H11 contactor is 140 Amps.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 100-D140H11

ManufacturerAllen Bradley
Product TypeContactor
Product LineIEC 100 Contactors
Part Number100-D140H11
Weight10.00 lbs (4.54 kg)
Poles3
MountingPanel
Current Rating140 Amps
Coil TypeConventional
Control Voltage208 Volts AC
Protection RatingIP00
Operating Temperature-25 to 60 degrees Celsius
NO Auxiliary Contacts1
NC Auxiliary Contacts1
Request a Repair

The 100-D140H11 contactor is a contactor developed for high-power industrial applications by Allen-Bradley. It is part of the Bulletin 100-D family of IEC contactors that are designed to be environmentally friendly. Allen-Bradley provides these contactors with a wide range of current ratings and AC/DC electronic or convectional coils. The contactor coils can also be ordered for a wide range of different AC/DC control voltages. The 100-D140H11 Bulletin 100-D contactor has a conventional coil that is rated for 208 Volts AC. The operating current rating of the 100-D140H11 contactor is 140 Amps. This current rating is valid for -25 to 60 degrees Celsius. If the ambient temperature rises to 70 degrees Celsius, then the current rating reduces by at least 15%.

The Allen-Bradley 100-D140H11 Bulletin 100-D contactor can also become damaged if it is operated outside the recommended range of temperature values. For storage, the recommended temperature range is -40 to 80 degrees Celsius. Allen-Bradley also recommends that the contactor be operated at altitudes of up to 2000 meters only. The protection rating of the 100-D140H11 contactor is IP 00 and it is designed for indoor installation and operation only. The contactor features 1 NC auxiliary contact and 1 NO auxiliary contact and both of these have an IP 20 protection rating. The maximum current carrying capacity of the 100-D140H11 contactor for single-phase AC voltage is 250 Amps. Because very high levels of current and voltage are present, the contactor should only be installed by trained technicians who know and follow all of the installation instructions provided by Allen-Bradley.