DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 100-D140T11 contactor is a Bulletin 100-D series 3-pole contactor. It has 3 main contacts and 2 auxiliary contacts. The 100-D140T11 contactor uses a conventional coil with 240 to 277 Volts AC of rated operating voltage.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 100-D140T11. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | IEC 100 Contactors |
Part Number | 100-D140T11 |
Product Type | IEC Contactor |
Product Line | Bulletin 100-D |
Number of Poles | 3 |
Auxiliary Contacts | 1 NO, 1 NC |
Coil Type | Conventional |
Coil Voltage | 240 to 277 Volts AC at 50 to 60 Hertz |
Maximum Current Rating | 250 Amps |
Brand | Allen-Bradley / Rockwell Automation |
Series | IEC 100 Contactors |
Part Number | 100-D140T11 |
Product Type | IEC Contactor |
Product Line | Bulletin 100-D |
Number of Poles | 3 |
Auxiliary Contacts | 1 NO, 1 NC |
Coil Type | Conventional |
Coil Voltage | 240 to 277 Volts AC at 50 to 60 Hertz |
Maximum Current Rating | 250 Amps |
The 100-D140T11 contactor is a standard 3-pole contactor from Allen-Bradley. It comes with 3 poles for its normally open main contacts, a normally open auxiliary contact, and a normally closed auxiliary contact, and it is part of the Bulletin 100-D product line in the IEC 100 Contactors series. The 100-D140T11 3-pole contactor operates with AC voltage and with AC-powered conventional coils. The conventional coils which this contactor uses are rated for 240 Volts AC operating voltage at 50 Hertz operating frequency and 277 Volts AC operating voltage at 60 Hertz operating frequency. The operating current ratings of the 100-D140T11 3-pole contactor are 140 Amps at 60 degrees Celsius and 400 Volts and 250 Amps at 40 degrees Celsius and 690 Volts.
The Allen-Bradley 100-D140T11 Bulletin 100-D 3-pole contactor can operate with a minimum Horsepower output rating of 50 Horsepower at 230 Volts and 60 Hertz and with a maximum Horsepower output rating of 125 Horsepower at 575 Volts and 60 Hertz. It can also operate with a minimum kilowatt output rating of 40 kilowatts at 200 Volts and 50 Hertz and with a maximum kilowatt output rating of 111 kilowatts at 690 Volts and 50 Hertz. Both the kilowatt and the Horsepower output ratings of the 100-D140T11 3-pole contactor are based on when it operates in switching-type applications for AC-2 motors and AC-3 motors. This contactor can perform switching functions for AC-2 and AC-3 motors that are rated at up to 1000 Volts with a kilowatt output rating of 75 kilowatts at a frequency rating of 50 Hertz.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 100-D140T11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | IEC 100 Contactors |
Part Number | 100-D140T11 |
Product Type | IEC Contactor |
Product Line | Bulletin 100-D |
Number of Poles | 3 |
Auxiliary Contacts | 1 NO, 1 NC |
Coil Type | Conventional |
Coil Voltage | 240 to 277 Volts AC at 50 to 60 Hertz |
Maximum Current Rating | 250 Amps |
Brand | Allen-Bradley / Rockwell Automation |
Series | IEC 100 Contactors |
Part Number | 100-D140T11 |
Product Type | IEC Contactor |
Product Line | Bulletin 100-D |
Number of Poles | 3 |
Auxiliary Contacts | 1 NO, 1 NC |
Coil Type | Conventional |
Coil Voltage | 240 to 277 Volts AC at 50 to 60 Hertz |
Maximum Current Rating | 250 Amps |
The 100-D140T11 contactor is a standard 3-pole contactor from Allen-Bradley. It comes with 3 poles for its normally open main contacts, a normally open auxiliary contact, and a normally closed auxiliary contact, and it is part of the Bulletin 100-D product line in the IEC 100 Contactors series. The 100-D140T11 3-pole contactor operates with AC voltage and with AC-powered conventional coils. The conventional coils which this contactor uses are rated for 240 Volts AC operating voltage at 50 Hertz operating frequency and 277 Volts AC operating voltage at 60 Hertz operating frequency. The operating current ratings of the 100-D140T11 3-pole contactor are 140 Amps at 60 degrees Celsius and 400 Volts and 250 Amps at 40 degrees Celsius and 690 Volts.
The Allen-Bradley 100-D140T11 Bulletin 100-D 3-pole contactor can operate with a minimum Horsepower output rating of 50 Horsepower at 230 Volts and 60 Hertz and with a maximum Horsepower output rating of 125 Horsepower at 575 Volts and 60 Hertz. It can also operate with a minimum kilowatt output rating of 40 kilowatts at 200 Volts and 50 Hertz and with a maximum kilowatt output rating of 111 kilowatts at 690 Volts and 50 Hertz. Both the kilowatt and the Horsepower output ratings of the 100-D140T11 3-pole contactor are based on when it operates in switching-type applications for AC-2 motors and AC-3 motors. This contactor can perform switching functions for AC-2 and AC-3 motors that are rated at up to 1000 Volts with a kilowatt output rating of 75 kilowatts at a frequency rating of 50 Hertz.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 100-D140T11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 100-D140T11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.