100-D140ZS22L | Allen Bradley PLC IEC 100 Contactors

100-D140ZS22L

Rated 4.8 with 15 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

100-D140ZS22L

Description: The 100-D140ZS22L contactor is a Bulletin 100-D non-reversing IEC contactor from Allen-Bradley/Rockwell Automation that complies with the CSA, UL, and SCCR Type 2 standards. It comes fitted with a conventional DC type of coil with a control voltage rating of 125 Volts DC. The contactor has an operational current rating of 140 Amps. It has 3 main poles (main contacts) and 4 built-in auxiliary contacts. The auxiliary contacts are composed of 2 normally open contacts and 2 normally closed contacts.  
Available Now
Request a quote for 100-D140ZS22L

Description:

The 100-D140ZS22L contactor is a Bulletin 100-D non-reversing IEC contactor from Allen-Bradley/Rockwell Automation that complies with the CSA, UL, and SCCR Type 2 standards. It comes fitted with a conventional DC type of coil with a control voltage rating of 125 Volts DC. The contactor has an operational current rating of 140 Amps. It has 3 main poles (main contacts) and 4 built-in auxiliary contacts. The auxiliary contacts are composed of 2 normally open contacts and 2 normally closed contacts.

 


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-D140ZS22L.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 15 reviews

    Technical Specifications for 100-D140ZS22L

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D140ZS22L
DescriptionNon-Reversing IEC Contactor
Type of ContactorMCS D
Product LineBulletin 100-D
Phases3
Number of Poles3
Current Rating 140 Amps
Coil TypeConventional DC Coil (Coil Code “ZS”)
Coil Voltage125 Volts DC
Auxiliary Contacts4
Auxiliary Contacts Configuration 2 NO, 2 NC
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D140ZS22L
DescriptionNon-Reversing IEC Contactor
Type of ContactorMCS D
Product LineBulletin 100-D
Phases3
Number of Poles3
Current Rating 140 Amps
Coil TypeConventional DC Coil (Coil Code “ZS”)
Coil Voltage125 Volts DC
Auxiliary Contacts4
Auxiliary Contacts Configuration 2 NO, 2 NC
s

About 100-D140ZS22L

The 100-D140ZS22L contactor is a non-reversing contactor from Allen-Bradley/Rockwell Automation. It is an MCS (Motor Control System) contactor from the Bulletin 100-D contactor series. This non-reversing contactor is IEC certified and it complies with the CSA, UL, and SCCR Type 2 industrial standards. This Bulletin 100-D IEC contactor has a conventional type of coil with a control or coil voltage rating of 125 Volts DC, 540 Watts of rated pick-up power, and 8 Watts of rated hold-in power consumption. The DC-operated 100-D140ZS22L contactor has an operational current rating of 140 Amps. When operating at 60 degrees Celsius, the operating kilowatt power rating of this non-reversing contactor is 45 kilowatts at 230 Volts, 82 kilowatts at 415 Volts, 80 kilowatts at 500 Volts, and 111 kilowatts at 690 Volts.



The Allen-Bradley/Rockwell Automation 100-D140ZS22L Bulletin 100-D non-reversing IEC contactor has 3 main contact poles and 4 built-in auxiliary contacts. The 4 built-in auxiliary contacts are configured as 2 normally open contacts and 2 normally closed contacts. If more auxiliary contacts are required by the application, auxiliary contact blocks are available as add-on accessories for this contactor. The 100-D140ZS22L contactor includes built-in terminal lugs and it is compatible with a variety of other accessories such as mechanical interlocks, terminal shields, terminal covers, and surge suppressors. The contactor has a 3-phase Horsepower output power rating of 100 Horsepower at 460 Volts AC. The 100-D140ZS22L non-reversing IEC contactor has an IP 00 enclosure protection rating and a Class B insulation rating on its conventional coil.



Repair Services for 100-D140ZS22L

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D140ZS22L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-D140ZS22L

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-D140ZS22L

Resolutions For 100-D140ZS22L

About

Technical Specifications for 100-D140ZS22L

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D140ZS22L
DescriptionNon-Reversing IEC Contactor
Type of ContactorMCS D
Product LineBulletin 100-D
Phases3
Number of Poles3
Current Rating 140 Amps
Coil TypeConventional DC Coil (Coil Code “ZS”)
Coil Voltage125 Volts DC
Auxiliary Contacts4
Auxiliary Contacts Configuration 2 NO, 2 NC
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D140ZS22L
DescriptionNon-Reversing IEC Contactor
Type of ContactorMCS D
Product LineBulletin 100-D
Phases3
Number of Poles3
Current Rating 140 Amps
Coil TypeConventional DC Coil (Coil Code “ZS”)
Coil Voltage125 Volts DC
Auxiliary Contacts4
Auxiliary Contacts Configuration 2 NO, 2 NC

About 100-D140ZS22L

The 100-D140ZS22L contactor is a non-reversing contactor from Allen-Bradley/Rockwell Automation. It is an MCS (Motor Control System) contactor from the Bulletin 100-D contactor series. This non-reversing contactor is IEC certified and it complies with the CSA, UL, and SCCR Type 2 industrial standards. This Bulletin 100-D IEC contactor has a conventional type of coil with a control or coil voltage rating of 125 Volts DC, 540 Watts of rated pick-up power, and 8 Watts of rated hold-in power consumption. The DC-operated 100-D140ZS22L contactor has an operational current rating of 140 Amps. When operating at 60 degrees Celsius, the operating kilowatt power rating of this non-reversing contactor is 45 kilowatts at 230 Volts, 82 kilowatts at 415 Volts, 80 kilowatts at 500 Volts, and 111 kilowatts at 690 Volts.



The Allen-Bradley/Rockwell Automation 100-D140ZS22L Bulletin 100-D non-reversing IEC contactor has 3 main contact poles and 4 built-in auxiliary contacts. The 4 built-in auxiliary contacts are configured as 2 normally open contacts and 2 normally closed contacts. If more auxiliary contacts are required by the application, auxiliary contact blocks are available as add-on accessories for this contactor. The 100-D140ZS22L contactor includes built-in terminal lugs and it is compatible with a variety of other accessories such as mechanical interlocks, terminal shields, terminal covers, and surge suppressors. The contactor has a 3-phase Horsepower output power rating of 100 Horsepower at 460 Volts AC. The 100-D140ZS22L non-reversing IEC contactor has an IP 00 enclosure protection rating and a Class B insulation rating on its conventional coil.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D140ZS22L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D140ZS22L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF