The Allen-Bradley 100-D140ZT11L contactor is a non-reversing contactor with a 140-Amp operational current rating. It is a member of the Bulletin 100-D contactors series. The 100-D140ZT11L IEC contactor is designed to be eco-friendly and flexible while also providing reliable performance. It is a 3-phase non-reversing contactor with a conventional type of DC coil with the coil code "ZT." The control voltage rating of the "ZT" coil that is integrated with the 100-D140ZT11L contactor is 250 Volts DC. A replacement coil (Cat. No. TG751) can be ordered separately for this contactor when the old one wears out. This Allen-Bradley contactor has 3 main contacts with screw terminal connections and 2 built-in auxiliary contacts. The integrated auxiliary contacts consist of 1 normally open and 1 normally closed auxiliary contact, with additional contacts available via auxiliary contact blocks if needed. The screw terminals on this contactor include built-in terminal lugs as standard features.

The Allen-Bradley 100-D140ZT11L Bulletin 100-D non-reversing IEC contactor has an operating current rating of 140 Amps at 60 degrees Celsius and 250 Amps at 40 degrees Celsius. The output power ratings of the contactor for switching AC motors (AC-2 and AC-3 types of motors) are 80 kilowatts at 415 Volts (50 Hertz) and 100 Horsepower at 460 Volts (60 Hertz). The contactor's operating temperature range is -25 degrees Celsius to +60 degrees Celsius for operation at full power. When the ambient temperature rises to 70 degrees Celsius, the operating current of the unit is reduced by 15% but the contactor can still operate. The 100-D140ZT11L 3-pole DC-operated contactor has an IP 00 general enclosure protection rating. When using a frame terminal block, the contactor has a higher protection rating of IP 20 per the IEC standards.