100-D180A11-X10

The Allen-Bradley Bulletin 100-D series 100-D180A11-X10 3-pole contactor is designed to provide low-cost contact switching for a wide range of applications. The 100-D180A11-X10 contactor supports voltage inputs with a nominal rating from 115 Volts AC to 600 Volts AC. It also supports an isolation voltage rating of up to 1000 Volts AC according to the IEC standards. The 100-D140G11 contactor has an AC-3 duty rating of 82 kilowatts and a maximum current rating of 140 Amps at 400 Volts AC. The 100-D180A11-X10 contactor is supplied with installation screws and ring lugs as standard features. It is also supplied with 2 side-mounted auxiliary contacts (1 normally closed and 1 normally open) for feedback wiring. The 100-D180A11-X10 contactor is enclosed with an IP 20-rated enclosure and it has an operating temperature range of -25 and 60 degrees Celsius. The 100-D180A11-X10 contactor has high thermal durability, and it can be installed at a maximum altitude of 3000 meters above sea level.

The Allen-Bradley 100-D180A11-X10 Bulletin 100-D contactor has a compact and highly resistant design that is suitable for extreme industrial conditions. Per the IEC industrial compliance requirements, it is designed to operate in any industrial condition with high shock and vibration ratings. The 100-D180A11-X10 contactor has an eco-friendly design, and it is RoHS certified for use in both industrial and non-industrial environments. The 100-D180A11-X10 contactor is designed to meet multiple worldwide industrial standards. It has a 3-pole design with 3 main power contacts for wiring to a 3-phase power supply. Up to 4 additional normally open auxiliary contact blocks are supported by this contractor along with the built-in auxiliary contacts. The 100-D180A11-X10 contactor is supplied without terminal lugs, but optional terminals can be added on for easy wiring.