The 100-D180C00 contactor from Allen-Bradley/Rockwell Automation uses a conventional type of AC coil that operates with one of the highest voltage ratings that is available for contactors with conventional coils in the Bulletin 100-D product line. The 100-D180C00 contactor’s coil voltage rating is 550 Volts AC at 50 Hertz and 600 Volts at 60 Hertz. This contactor only has 3 contacts because it does not come with any built-in auxiliary contacts. The only contacts that it has are its power contacts that are normally open and that connect it to its power supply. The IEC isolation voltage rating of the 100-D180C00 contactor is 1000 Volts, its UL and CSA isolation voltage rating is 690 Volts, and it can withstand a rated impulse voltage of 12 kilovolts.

The Allen-Bradley/Rockwell Automation 100-D180C00 contactor from the Bulletin 100-D product line has been designed and manufactured to be as environmentally friendly as possible. Its components are made from environmentally friendly materials whenever possible, it is designed to operate efficiently with the lowest possible power consumption rating, and it does not need to be completely replaced if any of its parts wear out or break down because several of its parts are replaceable, including key components like its power contacts. The 100-D180C00 contactor should not be used in outdoor environments or exposed to corrosive chemicals or significant quantities of dust, dirt, debris, or moisture, but it can operate at a temperature as high as 70 degrees Celsius or 158 degrees Fahrenheit with its current derated by 15%, and it can operate at a temperature as high as 60 degrees Celsius or 140 degrees Fahrenheit with its full current rating.