Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors 100-D180C11-X10

Product image is representative; revision or series may vary. Contact us to request a specific version.

100-D180C11-X10

|
Need a Specific Revision?

The Allen-Bradley/Rockwell Automation 100-D180C11-X10 AC IEC Contactor has been designed with conventional coils that are gold plated. This contactor is used to switch the current in electrical motors or equipment with high loads. This contactor operates with a coil voltage range of 550 to 600 Volts AC at 50 to 60 Hertz.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 100-D180C11-X10

ManufacturerAllen Bradley
CategoryPLCs
Product LineIEC 100 Contactors
Part Number100-D180C11-X10
Weight10.00 lbs (4.54 kg)
Type of ComponentContactor
Operating ModeNon-reversing
Poles3
Coil Voltage TypeStandard AC
Voltage Range550 to 600V AC
Frequency50-60 Hz
Current at 40 degrees Celsius250 A
Current at 60 degrees Celsius180 A
Auxiliary Contacts1 N.O., 1 N.C.
PLC InterfaceNone
Request a Repair

The 100-D180C11-X10 Industrial Contactor is an AC-powered IEC contactor that has been designed and manufactured by Allen-Bradley/Rockwell Automation as part of the Bulletin 100-D contactor product line. This contactor has been manufactured primarily to operate with high levels of switching power for industrial applications that involve the use of AC motors. This contactor has a compact design and it is made with environmentally friendly materials that allow it to operate in any standard type of industrial environment without causing any pollution or environmental harm. The Allen-Bradley/Rockwell Automation 100-D180C11-X10 AC IEC Contactor is made to be installed on a panel and the ambient temperature for operation at full power must not exceed 60 degrees Celsius. If this temperature is exceeded, the overload rating of the contactor must be derated so that it can operate without becoming damaged. Its current needs to be derated by 15% or more if it is used at 70 degrees Celsius.

The Allen-Bradley/Rockwell Automation 100-D180C11-X10 AC IEC Contactor from the Bulletin 100-D series can only operate with non-reversing equipment that has compatible voltage and frequency ratings because it is a non-reversing contactor. The overload current rating of the contactor must be compatible with the non-reversing equipment that it is connected to too. This contactor has a coil voltage rating between 550 and 600 Volts AC with frequency ratings of 50 and 60 Hertz, respectively. The Allen-Bradley/Rockwell Automation 100-D180C11-X10 AC IEC Contactor has a current rating of 180 Amps at 60 degrees Celsius. It operates with 3 main contact poles that each include conventional coils. These coils are all gold-plated. This contactor also comes with one normally open auxiliary contact and with one normally closed auxiliary contact. With both of these auxiliary contacts, the contactor can support a mirror contact performance which enables the normally closed main contact to remain in its normally closed state regardless of the state of power poles which are the main contacts.