100-D180EA11-X10

The 100-D180EA11-X10 contactor is a Bulletin 100-D non-reversing IEC contactor that has been designed and distributed by Allen-Bradley. This non-reversing contactor operates with 3 poles and with electronic coils with a current rating of up to 180 Amps at 60 degrees Celsius. This contactor also has output power ratings of 50 to 125 Horsepower at a frequency of 60 Hertz when it is used for switching AC motors. It is important to compare the specifications of this contactor with the specifications of the motor before attempting to install the contactor on the motor. All of the equipment in the system must be compatible, especially in terms of the current and voltage ratings. The Allen-Bradley 100-D180EA11-X10 non-reversing contactor has a voltage range of coil 208 to 277 Volts AC with a frequency range of 50 to 60 Hertz. This contactor can be ordered with an optional PLC interface that provides different kinds of advanced control features.

The Allen-Bradley 100-D180EA11-X10 Bulletin 100-D non-reversing contactor comes with 2 auxiliary contacts in addition to its 3 main contacts. One of these auxiliary contacts is normally open and the other one is normally closed. Both of them operate in conjunction with the 3 main power poles to perform the switching actions for motors when required. More auxiliary contacts can be added to the contactor if they are needed by the application. There is a wide range of accessories available for the Allen-Bradley 100-D180EA11-X10 non-reversing contactor. These accessories can be different kinds of auxiliary contacts, suppressor modules, reversing input connections, power wiring kits, and Wye-Delta and Delta-Wye connection devices. The contactor can be mounted on a panel. In some cases, it is recommended to ground the contactor so that it is not affected by electromagnetic interference. There is a neutral bridge device available in the accessories that can provide simple grounding options for this contactor.