100-D180ZD22L | Allen Bradley PLC IEC 100 Contactors

100-D180ZD22L

100-D180ZD22L

Description:

The 100-D180ZD22L contactor is a Bulletin 100-D IEC non-reversing type of contactor from Allen-Bradley. It comes with a conventional type of DC coil that has a maximum voltage rating of 110 Volts. It also comes with 4 auxiliary contacts composed of 2 normally open contacts and 2 normally closed contacts (one of the normally closed contacts is a late break contact.

Rated 4.5 with 8 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-D180ZD22L

Add more parts to quote

Description:

The 100-D180ZD22L contactor is a Bulletin 100-D IEC non-reversing type of contactor from Allen-Bradley. It comes with a conventional type of DC coil that has a maximum voltage rating of 110 Volts. It also comes with 4 auxiliary contacts composed of 2 normally open contacts and 2 normally closed contacts (one of the normally closed contacts is a late break contact.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-D180ZD22L.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 8 reviews

    Technical Specifications for 100-D180ZD22L

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D180ZD22L
DescriptionNon-Reversing IEC Contactor
Type of ContactorMCS D Contactor
Product LineBulletin 100-D
Phases3
Number of Poles3
Current Rating180 Amps
Coil TypeConventional DC Coil (Coil Code “ZD”)
Coil Voltage110V DC
Auxiliary Contacts Configuration2 NO, 2 NC (1 Late Break NC Contact)
Operating Power Ratings50 Hp at 200V AC (60 Hz) Minimum, 150 Hp at 460V AC (60 Hz) Maximum
Isolation Voltage Rating1000 Volts
Protection ClassIP 20 (with Terminal Block)
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D180ZD22L
DescriptionNon-Reversing IEC Contactor
Type of ContactorMCS D Contactor
Product LineBulletin 100-D
Phases3
Number of Poles3
Current Rating180 Amps
Coil TypeConventional DC Coil (Coil Code “ZD”)
Coil Voltage110V DC
Auxiliary Contacts Configuration2 NO, 2 NC (1 Late Break NC Contact)
Operating Power Ratings50 Hp at 200V AC (60 Hz) Minimum, 150 Hp at 460V AC (60 Hz) Maximum
Isolation Voltage Rating1000 Volts
Protection ClassIP 20 (with Terminal Block)
s

About 100-D180ZD22L

The 100-D180ZD22L contactor is an MCS Bulletin 100-D IEC contactor from Allen-Bradley. It is a member of the Bulletin 100-D series of Allen-Bradley contactor. Like other Bulletin 100-D contactors, the D180ZD22L contactor has a compact size despite being classified as a large-frame contactor. This contactor is compatible with the Allen-Bradley Bulletin 193 electronic overload relay modules. The 100-D180ZD22L contactor is a non-reversing type of IEC contactor. It is fitted with a “ZD” coil, which is a conventional type of DC coil that does not include a PLC interface. The conventional coil on the 100-D180ZD22L contactor has a voltage range of 110 Volts DC. This non-reversing contactor is a 3-phase, 3-pole contactor that features a total of 4 auxiliary contacts. The auxiliary contacts on the contactor are composed of two normally open (NO) and 2 normally closed (NC) contacts. One of the NC contacts is a  late-breaking contact and it must be connected to the pickup winding of the coil.



The Allen-Bradley 100-D180ZD22L Bulletin 100-D MCS contactor has a rated operational current of 180 Amps at an ambient temperature of 60 degrees Celsius. At an operating temperature of 40 degrees Celsius, the operating current is rated at 250 Amps. According to the IEC standards, the isolation voltage rating of the unit is 1000 Volts maximum. The 100-D180ZD22L contactor can withstand a maximum impulse voltage of 12 kilovolts. It supports output power ratings of 105 kilowatts for 3-phase AC motors rated at 415 Volts and output power ratings of 135 kilowatts for 3-phase AC motors rated at 690 Volts. The 100-D180ZD22L contactor has thru-hole screw-type terminals with terminal lugs. When a terminal block is used, the unit has an IP 20 maximum environmental protection rating.



Repair Services for 100-D180ZD22L

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D180ZD22L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-D180ZD22L

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-D180ZD22L

Resolutions For 100-D180ZD22L

About

Technical Specifications for 100-D180ZD22L

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D180ZD22L
DescriptionNon-Reversing IEC Contactor
Type of ContactorMCS D Contactor
Product LineBulletin 100-D
Phases3
Number of Poles3
Current Rating180 Amps
Coil TypeConventional DC Coil (Coil Code “ZD”)
Coil Voltage110V DC
Auxiliary Contacts Configuration2 NO, 2 NC (1 Late Break NC Contact)
Operating Power Ratings50 Hp at 200V AC (60 Hz) Minimum, 150 Hp at 460V AC (60 Hz) Maximum
Isolation Voltage Rating1000 Volts
Protection ClassIP 20 (with Terminal Block)
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D180ZD22L
DescriptionNon-Reversing IEC Contactor
Type of ContactorMCS D Contactor
Product LineBulletin 100-D
Phases3
Number of Poles3
Current Rating180 Amps
Coil TypeConventional DC Coil (Coil Code “ZD”)
Coil Voltage110V DC
Auxiliary Contacts Configuration2 NO, 2 NC (1 Late Break NC Contact)
Operating Power Ratings50 Hp at 200V AC (60 Hz) Minimum, 150 Hp at 460V AC (60 Hz) Maximum
Isolation Voltage Rating1000 Volts
Protection ClassIP 20 (with Terminal Block)

About 100-D180ZD22L

The 100-D180ZD22L contactor is an MCS Bulletin 100-D IEC contactor from Allen-Bradley. It is a member of the Bulletin 100-D series of Allen-Bradley contactor. Like other Bulletin 100-D contactors, the D180ZD22L contactor has a compact size despite being classified as a large-frame contactor. This contactor is compatible with the Allen-Bradley Bulletin 193 electronic overload relay modules. The 100-D180ZD22L contactor is a non-reversing type of IEC contactor. It is fitted with a “ZD” coil, which is a conventional type of DC coil that does not include a PLC interface. The conventional coil on the 100-D180ZD22L contactor has a voltage range of 110 Volts DC. This non-reversing contactor is a 3-phase, 3-pole contactor that features a total of 4 auxiliary contacts. The auxiliary contacts on the contactor are composed of two normally open (NO) and 2 normally closed (NC) contacts. One of the NC contacts is a  late-breaking contact and it must be connected to the pickup winding of the coil.



The Allen-Bradley 100-D180ZD22L Bulletin 100-D MCS contactor has a rated operational current of 180 Amps at an ambient temperature of 60 degrees Celsius. At an operating temperature of 40 degrees Celsius, the operating current is rated at 250 Amps. According to the IEC standards, the isolation voltage rating of the unit is 1000 Volts maximum. The 100-D180ZD22L contactor can withstand a maximum impulse voltage of 12 kilovolts. It supports output power ratings of 105 kilowatts for 3-phase AC motors rated at 415 Volts and output power ratings of 135 kilowatts for 3-phase AC motors rated at 690 Volts. The 100-D180ZD22L contactor has thru-hole screw-type terminals with terminal lugs. When a terminal block is used, the unit has an IP 20 maximum environmental protection rating.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D180ZD22L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D180ZD22L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF