100-D180ZJ11L | Allen Bradley PLC IEC 100 Contactors

100-D180ZJ11L

100-D180ZJ11L

Description:

The 100-D180ZJ11L IEC contactor is an Allen-Bradley Bulletin 100-D IEC contactor designed to provide cost-effective electrical switching for a wide range of applications. The 100-D180ZJ11L contactor has a DC-operated coil without an integrated PLC interface. The 100-D180ZJ11L contactor has a maximum current rating of 180 Amps.

Rated 4.9 with 14 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-D180ZJ11L

Add more parts to quote

Description:

The 100-D180ZJ11L IEC contactor is an Allen-Bradley Bulletin 100-D IEC contactor designed to provide cost-effective electrical switching for a wide range of applications. The 100-D180ZJ11L contactor has a DC-operated coil without an integrated PLC interface. The 100-D180ZJ11L contactor has a maximum current rating of 180 Amps.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-D180ZJ11L.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 14 reviews

    Technical Specifications for 100-D180ZJ11L

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D180ZJ11L
DescriptionDC-Operated Contactor
Current Rating180 Amps
Coil TypeStandard DC Conventional Coil
Coil Voltage24 Volts DC
PLC InterfaceNone
Number of Poles3
Terminal TypeBolt-in Type
Auxiliary Contacts1 Normally Open (NO) and 1 Normally Closed (NC)
Protection ClassIP 20
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D180ZJ11L
DescriptionDC-Operated Contactor
Current Rating180 Amps
Coil TypeStandard DC Conventional Coil
Coil Voltage24 Volts DC
PLC InterfaceNone
Number of Poles3
Terminal TypeBolt-in Type
Auxiliary Contacts1 Normally Open (NO) and 1 Normally Closed (NC)
Protection ClassIP 20
s

About 100-D180ZJ11L

The Allen-Bradley 100-D180ZJ11L Bulletin 100-D IEC contactor is a 3-phase contactor designed for high-load applications. It has a DC-operated conventional coil, and it comes as a complete factory-assembled unit. The 100-D180ZJ11L contactor has an IP 20 type of industrial housing which provides protection against dust and prevents small foreign particles from entering the internal parts of the contactor. The 100-D180ZJ11L contactor is also rated for use in high shock and high vibration conditions (per the IEC standards). It supports panel mounting and can be installed inside a control cabinet. The 100-D180ZJ11L contactor has an IEC rated operating temperature range of -25 degrees Celsius to 60 degrees Celsius. Its design allows for high thermal and electrical ratings (up to 1000 Volts) and it is built for installation at high altitudes (up to 3000 meters above sea level).



The Allen-Bradley 100-D180ZJ11L Bulletin 100-D contactor offers several built-in protection features, including a surge suppression option (for protection against high-voltage conditions), a high impulse voltage withstand rating (up to 8000 Volts), and a high voltage isolation rating. The 100-D180ZJ11L contactor accepts either AC or DC external inputs. It also has an acceptable input voltage range between 115 Volts AC and 600 Volts AC or 40 Volts DC and 440 Volts DC. The 100-D180ZJ11L contactor has a switching rating of 90 kilowatts at 690 Volt AC (50 Hertz) and a maximum carrying-current rating of 180 Amps at 400 Volts AC. The 100-D180ZJ11L contactor has 3 main power contacts that support bolt-in types of connections. It supports feed-through wiring, and it comes with 2 side-mounted auxiliary contacts for feedback wiring. The 100-D180ZJ11L contactor also has terminal lugs supplied as standard options for quick wiring and installation.



Repair Services for 100-D180ZJ11L

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D180ZJ11L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-D180ZJ11L

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-D180ZJ11L

Resolutions For 100-D180ZJ11L

About

Technical Specifications for 100-D180ZJ11L

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D180ZJ11L
DescriptionDC-Operated Contactor
Current Rating180 Amps
Coil TypeStandard DC Conventional Coil
Coil Voltage24 Volts DC
PLC InterfaceNone
Number of Poles3
Terminal TypeBolt-in Type
Auxiliary Contacts1 Normally Open (NO) and 1 Normally Closed (NC)
Protection ClassIP 20
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D180ZJ11L
DescriptionDC-Operated Contactor
Current Rating180 Amps
Coil TypeStandard DC Conventional Coil
Coil Voltage24 Volts DC
PLC InterfaceNone
Number of Poles3
Terminal TypeBolt-in Type
Auxiliary Contacts1 Normally Open (NO) and 1 Normally Closed (NC)
Protection ClassIP 20

About 100-D180ZJ11L

The Allen-Bradley 100-D180ZJ11L Bulletin 100-D IEC contactor is a 3-phase contactor designed for high-load applications. It has a DC-operated conventional coil, and it comes as a complete factory-assembled unit. The 100-D180ZJ11L contactor has an IP 20 type of industrial housing which provides protection against dust and prevents small foreign particles from entering the internal parts of the contactor. The 100-D180ZJ11L contactor is also rated for use in high shock and high vibration conditions (per the IEC standards). It supports panel mounting and can be installed inside a control cabinet. The 100-D180ZJ11L contactor has an IEC rated operating temperature range of -25 degrees Celsius to 60 degrees Celsius. Its design allows for high thermal and electrical ratings (up to 1000 Volts) and it is built for installation at high altitudes (up to 3000 meters above sea level).



The Allen-Bradley 100-D180ZJ11L Bulletin 100-D contactor offers several built-in protection features, including a surge suppression option (for protection against high-voltage conditions), a high impulse voltage withstand rating (up to 8000 Volts), and a high voltage isolation rating. The 100-D180ZJ11L contactor accepts either AC or DC external inputs. It also has an acceptable input voltage range between 115 Volts AC and 600 Volts AC or 40 Volts DC and 440 Volts DC. The 100-D180ZJ11L contactor has a switching rating of 90 kilowatts at 690 Volt AC (50 Hertz) and a maximum carrying-current rating of 180 Amps at 400 Volts AC. The 100-D180ZJ11L contactor has 3 main power contacts that support bolt-in types of connections. It supports feed-through wiring, and it comes with 2 side-mounted auxiliary contacts for feedback wiring. The 100-D180ZJ11L contactor also has terminal lugs supplied as standard options for quick wiring and installation.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D180ZJ11L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D180ZJ11L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF