100-D210EA00 | Allen Bradley PLC IEC 100 Contactors

100-D210EA00

100-D210EA00

Description:

The Allen-Bradley 100-D210EA00 contactor is a Bulletin 100-D non-reversing contactor. It does not have auxiliary contacts but it does have an electronic interface. The 100-D210EA00 contactor’s coil voltage rating is 208 to 277 Volts AC.

Rated 4.9 with 10 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-D210EA00

Add more parts to quote

Description:

The Allen-Bradley 100-D210EA00 contactor is a Bulletin 100-D non-reversing contactor. It does not have auxiliary contacts but it does have an electronic interface. The 100-D210EA00 contactor’s coil voltage rating is 208 to 277 Volts AC.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-D210EA00.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 10 reviews

    Technical Specifications for 100-D210EA00

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D210EA00
Product TypeIEC Contactor
Product LineBulletin 100-D
Number of Poles3
Auxiliary ContactsNone
Coil TypeElectronic
Electronic InterfaceSupported
Coil Voltage208 to 277 Volts AC at 50 to 50 Hertz
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D210EA00
Product TypeIEC Contactor
Product LineBulletin 100-D
Number of Poles3
Auxiliary ContactsNone
Coil TypeElectronic
Electronic InterfaceSupported
Coil Voltage208 to 277 Volts AC at 50 to 50 Hertz
s

About 100-D210EA00

The 100-D210EA00 contactor is a basic non-reversing contactor from the IEC 100 Contactors and Bulletin 100-D series of contactors that are manufactured by Allen-Bradley/Rockwell Automation. It is a non-reversing contactor because it cannot reverse the voltage flow within a motor. It also does not have auxiliary contacts unless contact blocks with normally open and normally closed contacts are added to it. The only contacts that are built into the top of the 100-D210EA00 non-reversing contactor are its 3 normally open main contacts which are used for making power connections. Any auxiliary contacts that are added to the contactor are added to its left and right sides. The only mounting base that the 100-D210EA00 non-reversing contactor should be used with is a panel.



 



The current rating of the Allen-Bradley/Rockwell Automation 100-D210EA00 non-reversing contactor from the Bulletin 100-D series is 350 Amps at 40 degrees Celsius and 690 Volts with an AC-1 type of motor, and it is 210 Amps at 60 degrees Celsius and 400 Volts with an AC-3 type of motor. The 100-D210EA00 non-reversing contactor has an electronic coil that can support an electronic interface which gives the contactor advanced control options. The electronic coil’s voltage rating is 208 to 277 Volts AC at 50 to 60 Hertz. The pickup voltage rating for the electronic interface is 13 to 30.2 Volts DC and the dropout voltage rating is -3 to 5 Volts DC. The 100-D210EA00 non-reversing contactor’s normal operating temperature range is between -25 degrees Celsius and 60 degrees Celsius, which makes it suitable for use in a variety of industrial environments.



Repair Services for 100-D210EA00

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D210EA00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-D210EA00

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-D210EA00

Resolutions For 100-D210EA00

About

Technical Specifications for 100-D210EA00

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D210EA00
Product TypeIEC Contactor
Product LineBulletin 100-D
Number of Poles3
Auxiliary ContactsNone
Coil TypeElectronic
Electronic InterfaceSupported
Coil Voltage208 to 277 Volts AC at 50 to 50 Hertz
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-D210EA00
Product TypeIEC Contactor
Product LineBulletin 100-D
Number of Poles3
Auxiliary ContactsNone
Coil TypeElectronic
Electronic InterfaceSupported
Coil Voltage208 to 277 Volts AC at 50 to 50 Hertz

About 100-D210EA00

The 100-D210EA00 contactor is a basic non-reversing contactor from the IEC 100 Contactors and Bulletin 100-D series of contactors that are manufactured by Allen-Bradley/Rockwell Automation. It is a non-reversing contactor because it cannot reverse the voltage flow within a motor. It also does not have auxiliary contacts unless contact blocks with normally open and normally closed contacts are added to it. The only contacts that are built into the top of the 100-D210EA00 non-reversing contactor are its 3 normally open main contacts which are used for making power connections. Any auxiliary contacts that are added to the contactor are added to its left and right sides. The only mounting base that the 100-D210EA00 non-reversing contactor should be used with is a panel.



 



The current rating of the Allen-Bradley/Rockwell Automation 100-D210EA00 non-reversing contactor from the Bulletin 100-D series is 350 Amps at 40 degrees Celsius and 690 Volts with an AC-1 type of motor, and it is 210 Amps at 60 degrees Celsius and 400 Volts with an AC-3 type of motor. The 100-D210EA00 non-reversing contactor has an electronic coil that can support an electronic interface which gives the contactor advanced control options. The electronic coil’s voltage rating is 208 to 277 Volts AC at 50 to 60 Hertz. The pickup voltage rating for the electronic interface is 13 to 30.2 Volts DC and the dropout voltage rating is -3 to 5 Volts DC. The 100-D210EA00 non-reversing contactor’s normal operating temperature range is between -25 degrees Celsius and 60 degrees Celsius, which makes it suitable for use in a variety of industrial environments.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D210EA00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-D210EA00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF