100-D210EJ11

The Allen-Bradley 100-D210EJ11 Bulletin 100-D contactor has an electronic type of coil with a low coil voltage rating. It also has an integrated PLC interface for easy integration into a PLC system. With its low switching power ratings (24 Volts, 10 Amps), this contactor can be wired directly to a PLC without an interposing relay. The 100-D210EJ11 contactor has an integrated surge suppression circuit for protection against high voltage conditions. It also has Class B thermal and electrical insulation. The 100-D210EJ11 contactor has a coil voltage rating of 24 Volts AC (at 50 Hertz) and a main circuit voltage rating of 115 to 600 Volts AC. The 100-D210EJ11 contactor also has a switching power rating (AC-3) of 125 kilowatts and a maximum breaking current rating of 210 Amps.

The Allen-Bradley 100-D210EJ11 Bulletin 100-D contactor is supplied with 2 side-mounted auxiliary contacts (1 NO and 1 NC) that support snap-in installation. Up to 2 additional auxiliary contacts (2 NO or 2 NC contacts) can be added to simplify feedback wiring. The 100-D210EJ11 contactor has 3 main power contacts labelled L1, L2, and L3 for wiring to the main power supply. These contacts are all normally open type, and they have flat-end type terminals that can be connected in bolt-in type connection. Ring lugs and terminal lugs can be ordered to simplify the field-wiring and installation process. The 100-D210EJ11 contactor has a sealed IP 20 housing that protects it against touch and dust and other contaminants. It is designed to meet relevant industry standards and certifications such as the IEC, CCC, CSA, CE, UL, and c-UL-us standards. The 100-D210EJ11 contactor is also designed to meet RoHS directives for use in industrial and non-industrial environments.