100-D210EN00

The Allen-Bradley 100-D210EN00 non-reversing contactor is a Bulletin 100-D 3-phase contactor from Allen Bradley/Rockwell Automation designed for large current load applications. The 100-D210EN00 contactor comes with a built-in surge suppression circuit and an integrated PLC interface as standard options. Terminals and auxiliary contacts are not supplied with this contactor, however, up to 4 auxiliary contacts and terminals can be added on to simplify the installation and field-side wiring. The main circuit has 3 normally open contacts (L1, L2, and L3) for connecting power cables. These contacts support a bolt-in connection with the main power cables, and they have flat-end screw terminals for quick and convenient wiring. The 100-D210EN00 contactor has an electronic AC-controlled coil with an integrated PLC interface. This coil features a low switching rating (with 15 milliamps, and 24 Volts DC signal ratings), which allows for direct connection to a PLC without interposing relays. This coil also features low power pick-up and holding range.

The Allen-Bradley 100-D210EN00 Bulletin 100-D non-reversing contactor has a sealed industrial housing with an IP 20 ingress protection rating for protection against touch and dust. It also has Class B insulation for its electronic coil. Either a 3-phase AC power source or DC power source can be connected to the main contactor terminals. The acceptable operating voltage rating for this unit is 24 to 440 Volts DC or 115 to 600 Volts AC (with a 50/60 Hertz frequency range). The 100-D210EN00 contactor is also rated for operation at an isolation voltage rating of 1000 Volts AC (the standard IEC rating). It has a wide operating coil voltage range (380 to 500 Volts AC) at a coil frequency rating of 50 Hertz. The 100-D210EN00 contactor has 125 kilowatts maximum power rating for switching AC motors (AC-3 and AC-2 motors) and a maximum breaking current rating of 210 Amps.