100-D210EY00

The 100-D210EY00 contactor is a Bulletin 100-D IEC contactor that comes with electronic coils. This contactor has been designed by Allen-Bradley/Rockwell Automation and it can be used in different applications that involve the use of heavy-duty machines such as non-reversing motors. The 100-D210EY00 contactor is a similar device to a relay or switch. The difference lies in the fact that the contactor is designed to be used with heavy-duty equipment while the other devices are not. The Allen-Bradley/Rockwell Automation 100-D210EY00 contactor operates with standard AC voltage. This coil voltage range goes from 42 to 64 Volts AC. The voltage range must not be exceeded at any point during operation. The frequency applied goes from 50 to 60 Hertz and the current used is rated at 210 Amps at 60 degrees Celsius.

The Allen-Bradley/Rockwell Automation 100-D210EY00 Bulletin 100-D IEC contactor has been designed with materials that do not harm the natural environment. This contactor can be used in different industrial environments but it is recommended to avoid putting it in contact with corrosive materials, vapors, or gases to protect the physical structure of the contactor and extend its operating life. The Allen-Bradley/Rockwell Automation 100-D210EY00 contactor can be used at its full capacity when used at a maximum ambient temperature of 60 degrees Celsius. If the temperature that is used is higher (up to 70 degrees Celsius), the contactor will need to be derated or it will risk malfunctioning or damage. Another important factor when evaluating the ratings of the contactor is the altitude of the intended operating environment. In locations with altitudes higher than 1000 meters above sea level, the contactor will need to be derated. The 100-D210EY00 contactor must be mounted on a panel.