100-D210EY11

The 100-D210EY11 contactor is an Allen-Bradley 3-pole contactor with 2 auxiliary contacts. The contactor is part of the Allen-Bradley Bulletin 100-D product line. The 100-D210EY11 contactor is rated for 210 Amps. Contactors like the 100-D210EY11 contactor are used to switch electrical circuits in industrial systems on and off. The contactor is controlled by an electronic coil which has a lower power rating than the contactor itself. The coil on the 100-D210EY11 contactor has a rated control voltage range of 42 to 64 Volts AC at 50 Hertz operating frequency. The electronic coil on the 100-D210EY11 contactor includes an integrated electrical interface. The protection class of the contactor is IP 00. It can be panel mounted and it should only be used indoors where it will be safe from moisture, dust, dirt, and corrosive elements. The dimensions of the contactor are 205 x 155 x 180 millimeters.

Allen-Bradley recommends switching off the 100-D210EY11 Bulletin 100-D contactor before any maintenance or troubleshooting is performed on it. Failure to do so can lead to serious injury or even death. Allen-Bradley also recommends that only original Allen-Bradley spare parts be used to upgrade or repair the contactor. Failure to follow this recommendation can affect the reliability of the device. The technicians who are involved in operating the contactor should read and understand the operating instructions and safety guidelines included in the instruction manual. The 100-D210EY11 contactor should be commissioned and maintained only by qualified personnel. One of the auxiliary contacts on the 100-D210EY11 contactor is normally closed and the other auxiliary contact is normally open. The protection class of the auxiliary contacts is IP 20. The 100-D210EY11 contactor should not be installed or operated at altitudes that exceed 2000 meters above sea level.