The Allen-Bradley 100-D210EZD00 contactor is one of the Bulletin 100-D series contactors that is IEC compliant. It is manufactured by Allen-Bradley/Rockwell Automation primarily for industrial applications. The 100-D210EZD00 contactor is used as a motor control unit or a starter component that is capable of operating in harsh ambient conditions. This Allen-Bradley contactor is a non-reversing type of contactor. It comes with 3 main contacts and no auxiliary contacts. The 100-D210EZD00 non-reversing contactor comes equipped with an electronic coil (coil code EZD). The electronic coil on the contactor is a DC coil with an operating voltage range between 110 Volts DC and 130 Volts DC. The electronic coil features an EI or electronic interface that supports advanced control options. The electronic interface comes with a rated voltage of 24 Volts DC and an operating current of 15 milliamps. 

The Allen-Bradley 100-D210EZD00 Bulletin 100-D contactor has an operating current rating of 210 Amps when operating at an ambient temperature of 60 degrees Celsius. At a temperature of 40 degrees Celsius, the operating current rating of the contactor is rated at 350 Amps (AC-1). When operating at a frequency of 50 Hertz, the contactor has different output power ratings at different voltages. At a 3-phase voltage rating of 230 Volts, the output power rating of the unit is 60 Horsepower, at 460 Volts, it is 150 Horsepower, and at 575 Volts, the maximum output power rating of 200 Horsepower. A wide selection of connecting components is available for the 100-D210EZD00 contactor, including reverse input/output connectors, neutral bridges (Wye-Delta), power wiring kits, terminal lugs, terminal shields, and terminal covers. This non-reversing contactor also supports suppressor modules that can be ordered separately for surge protection. The main contacts of this contactor can also be replaced when they wear out or become damaged.