Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors 100-D210EZD11

Product image is representative; revision or series may vary. Contact us to request a specific version.

100-D210EZD11

|
Need a Specific Revision?

The 100-D210EZD11 contactor is a Bulletin 100-D non-reversing IEC contactor manufactured by Allen-Bradley. It has an operating current rating of 210 Amps (AC-3). It comes with an electronic type of DC coil with a 110 to 130 Volts DC voltage range. It comes with 3 main contacts and 2 auxiliary contacts (1 N.O. and 1 N.C.).

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 100-D210EZD11

ManufacturerAllen Bradley
CategoryPLCs
Product LineIEC 100 Contactors
Part Number100-D210EZD11
Weight12.00 lbs (5.44 kg)
DescriptionNon-Reversing IEC Contactor
Type of ContactorMCS D Contactor
Phases3
Number of Poles3
Current Rating180 Amps
Coil TypeElectronic Coil with Electronic Interface (Coil Code “EZD”)
Coil Voltage110 to 130 Volts DC
Auxiliary Contacts2
Auxiliary Contacts Configuration1 NO, 1 NC
Request a Repair

The Allen-Bradley 100-D210EZD11 contactor is an MCS D non-reversing type of IEC contactor. It is part of the IEC contactor family in the Allen-Bradley Bulletin 100-D product line. The 100-D210EZD11 IEC contactor is compact and it has low initial and operating costs. The modular design of this contactor makes it very easy for the operators to replace the damaged parts and to replace them independently of the other components of the contactor. This Allen-Bradley contactor module comes with an AC-3 current rating of 210 Amps at an operating voltage rating of 400 Volts. It contains an electronic type of coil with DC control voltage. The operating voltage range of the electronic coil is 110 to 130 Volts DC. The electronic coil on the 100-D210EZD11 also comes with an integrated electronic interface. This non-reversing IEC contactor comes with 3 main contacts with 2 auxiliary contacts.

The auxiliary contacts on the Allen-Bradley 100-D210EZD11 Bulletin 100-D contactor are configured as one N.O. (Normally Open) contact and one N.C. (Normally Closed) contact. If more auxiliary contacts are required, optional contact blocks can be used. The 100-D210EZD11 non-reversing IEC contactor comes with threaded screw-type terminals for connections. The main contacts terminal can accommodate conductors with a maximum diameter of 8.3 millimeters and a maximum cross-section of 300 MCM per the UL/CSA standards. The 100-D210EZD11 contactor supports switching for 3-phase motors with various output power ranges from 67 kilowatts at 230 Volts to 205 kilowatts at 690 Volts. Per the IEC specifications, the rated isolation voltage of the contactor is 1000 Volts with a maximum output power rating of 110 kilowatts. The contactor comes with an operating temperature range of -25 to 60 degrees Celsius.