100-D210EZJ00

The Allen-Bradley 100-D210EZJ00 Bulletin 100-D contactor features an electronic DC-operated coil with an integrated PLC interface for control. This coil provides a signal voltage rating of 24 Volts DC at 15 milliamps of current, and it has a rated pick-up voltage range of 13 to 30.2 Volts DC. The low switching rating of the 100-D210EZJ00 contactor’s coil allows for direct connection with a PLC system, thus eliminating the need for installing any interposing relays. The 100-D210EZJ00 contactor’s electronic coil has 2 main contacts that are wired directly to a separate 24 Volts DC rated power supply, and it also has an additional S1 PLC switch for interfacing with a PLC system. The 100-D210EZJ00 contactor has a nominal coil voltage rating of 24 Volts DC, and it comes with a Class B insulation.

The Allen-Bradley 100-D210EZJ00 Bulletin 100-D contactor has a rated operational current of 210 Amps (with 350 Amps of AC-1 current at 690 Volts AC) and a switching AC motor rating of 125 kilowatts. The 100-D210EZJ00 contactor has a rated nominal operating voltage range of 230 Volts AC to 690 Volts AC (at 50 to 60 Hertz line frequency), but it can be operated at a voltage rating of up 1000 Volts AC. It has 3 main contacts that are normally open contacts for 3-phase wiring. Line cables can be wired directly to the main contacts by using bolt-in screws. The 100-D210EZJ00 contactor has flat-type line side terminals that allow for quick and easy wiring. The 100-D210EZJ00 contactor does not come with auxiliary contacts, however, up to 4 normally open or normally closed auxiliary contacts can be added on to simplify feedback wiring. Additionally, terminals and lug kits can be ordered from the Bulletin 100-D accessories catalog for this contactor to simplify wiring and installation.