100-D210EZJ22

The Allen-Bradley 100-D210EZJ22 Bulletin 100-D IEC contactor is a 3-pole contactor with 3 main power contacts. These contacts are all normally open contacts. Each contact has flat type terminals that can be bolted down with screws. The flat-end terminals also allow for quick and easy contactor wiring. Even though this unit is not supplied with auxiliary contacts, up to 4 user-supplied contacts can be ordered separately for additional control options. The users can also order terminals and lug kits from a wide range of compatible accessories. The 100-D210EZJ22 contactor has an electronic type of coil that offers a lower switching rating than conventional coils. This coil offers lower pickups and hold-in current ratings than other coils. It also offers low signal voltage ratings (24 Volts DC at 15 milliamps) for a direct interface with a PLC. The coil comes with Class B insulation, and it also comes with an S1 PLC in addition to its 2 primary power contacts.

The Allen-Bradley 100-D210EZJ22 Bulletin 100-D IEC contactor is designed to accept AC input levels with a nominal operating voltage range between 230 Volts AC and 690 Volts AC. Its main circuit has a rated switching power of 125 kilowatts and a maximum breaking current of 210 Amps. The 100-D210EZJ22 contactor has an integrated surge suppression capability, and it provides voltage isolation at up to 690 Volts AC. It has a rated ambient temperature range of -25 to 60 degrees Celsius, and a maximum rated installation level of 3000 meters above sea level. The 100-D210EZJ22 contactor is designed for panel mounting, and it can be installed within a control cabinet. It comes with an IP 20 rated industrial enclosure that prevents the users from touching the contacts and that keeps out dust and other foreign particles.