The Allen-Bradley 100-D210EZY00 Bulletin 100-D contactor has an electronic type of DC-controlled coil with an integrated PLC interface. The coil voltage range is between 48 Volts DC and 72 Volts DC, and the coil has a nominal signal voltage rating of 24 Volts DC at 15 milliamps. The 100-D210EZY00 contactor features a low switching rating that allows for direct wiring to a PLC without interposing relay circuits. The 100-D210EZY00 contactor has an S1 switch in addition to its standard A1 and A2 coil terminals for PLC wiring. Direct integration into a PLC system allows for the remote actuation of coil contacts from a PLC CPU or an operator interface device. The 100-D210EZY00 contactor is supplied without an auxiliary contact or a terminal lug kit. However, the operators can order up to 4 snap-in auxiliary contacts which can be easily mounted on the side of the contactor. 

The Allen-Bradley 100-D210EZY00 Bulletin 100-D contactor supports direct 3-phase wiring to a power source. It has 3 main power contacts on the main circuit. These contacts are of the Normally Open (NO) contact type and they all have flat types of terminals that support bolt-in connections. The 100-D210EZY00 contactor accepts a 3-phase external AC power supply. It has a rated operating range of 230 Volts AC to 690 Volts AC at a 50 to 60 frequency range. The 100-D210EZY00 contactor has a rated operating current rating of 210 Amps at 400 Volts AC and a rated operating current rating of 350 Amps at 690 Volts AC. It has a maximum output power rating of 125 kilowatts at 415 Volts AC. The 100-D210EZY00 contactor supports cabinet installation.