100-D210EZY11

The 100-D210EZY11 contactor is an Allen-Bradley Bulletin 100-D contactor. It is used for switching high-power electrical circuits. Contactors like the 100-D210EZY11 contactor are used for applications involving electrical lighting and 3-phase AC motors. For 3-phase AC applications, the rated current carrying capacity of the 100-D210EZY11 contactor is 210 Amps at 60 degrees Celsius. For single-phase AC applications, the rated current carrying capacity of the 100-D210EZY11 contactor is 350 Amps at 40 degrees Celsius. The control coil on the contactor is the electronic type. The control voltage range for the control coil is 48 to 72 Volts DC. The height of the contactor is 205 millimeters, the width is 155 millimeters, and the depth is 180 millimeters. Allen-Bradley has specified that the contactor can be installed with a maximum tilt of +/-25 degrees relative to the vertical axis.

The Allen-Bradley 100-D210EZY11 Bulletin 100-D contactor can also be installed at a clockwise or counterclockwise angle of up to +/-90 degrees from the vertical orientation. Only qualified technicians should install and maintain the device. Due to the presence of dangerous electric voltage in the contactor, the 100-D210EZY11 contactor should be switched off before any maintenance work is performed on it. The main contacts and the arc-chute need to be examined after every short circuit. Allen-Bradley recommends that only spare parts that are designed and manufactured by Allen-Bradley be used for repairing or upgrading the contactor, otherwise the reliability of the device will be negatively affected. The auxiliary switch block, the main contacts, and the main chute on the 100-D210EZY11 contactor can all be replaced. One normally closed auxiliary contact and one normally open auxiliary contact are available on the contactor as well as its 3 main contacts.