100-D210VN11

The Allen-Bradley 100-D210VN11 contactor is a large-frame non-reversing contactor. It has a maximum voltage rating of 460 Volts AC. The maximum current rating is 210 Amps. The contactor supports 2 auxiliary contacts and 3 main contacts. It is made of environmentally friendly materials and it is part of the Allen-Bradley Bulletin 100-D series of IEC contactors. The Bulletin 100-D series contactors can support both electronic and conventional control coils. The control voltages for these contactors can be AC or DC voltage. The required coil type and the control voltage range for the contactor needs to be specified when it is ordered. A wide range of accessories is also available for the Bulletin 100-D contactors like the 100-D210VN11 contactor, including surge suppressors, terminal lugs, and terminal shields. The 100-D210VN11 contactor measures 205 x 155 x 180 millimeters and it can only be panel mounted.

The Allen-Bradley 100-D210VN11 Bulletin 100-D contactor has an IP 00 environmental protection rating. It can be used indoors only and it needs to be protected from dust and moisture. The ambient relative humidity level should not exceed 90% and there should be no condensation. The ambient temperature and the altitude should not exceed 60 degrees Celsius and 2000 meters respectively for ideal operation. Beyond these manufacturer-specified limits, the contactor performance derates and the current falls to 85% of the highest rated current at 70 degrees Celsius. The 100-D210VN11 contactor has an isolation voltage rating of 1000 Volts per the IEC standards and an impulse withstand voltage rating of 12 kilovolts. The 100-D210VN11 contactor is a 3-pole contactor. This contactor is certified by the cULus, CCC, and CE standards and it complies with the CSA, UL, and IEC standards as well. Only trained and experienced technicians should handle, install, operate, and maintain the contactor.