100-D250ED11

The Allen-Bradley 100-D250ED11 contactor is a Bulletin 100-D 3-pole non-reversing AC contactor for high-current applications. The 100-D250ED11 contactor is IEC rated for use in a tough industrial environment. It has a compact and rugged design that can withstand high electrical and thermal ratings. The 100-D250ED11 contactor also has an eco-friendly design that is suitable for both industrial and non-industrial environments. It is RoHS certified. The 100-D250ED11 contactor is also CCC, CE, and c-UL-us certified. It is designed to meet the IEC, CSA, and UL industrial standards. The 100-D250ED11 contactor has an IP 20 rated enclosure that provides protection against dust and prevents the users from touching the internal components. The 100-D250ED11 contactor is designed for panel mounting, and it has a rated operating temperature range of -25 to 60 degrees Celsius.

The Allen-Bradley 100-D250ED11 Bulletin 100-D contactor has a nominal voltage range of 115 Volts AC to 600 Volts AC, but it is rated for a maximum isolation voltage rating of 1000 Volts AC. It has a maximum output power rating of 250 kilowatts at 500 Volts AC and a braking current rating of 250 Amps. The 100-D250ED11 contactor has an AC-operated electronic coil with a PLC interface and a signal voltage rating of 24 Volts at 15 milliamps. This coil has a control voltage range of 110 to 130 Volts AC (at 50/60 Hertz coil frequency) and a low pickup voltage range of 13 Volts DC to 30.2 Volts DC. The 100-D250ED11 contactor has 3 main power contacts that are normally open (NO) contacts for wiring to an external AC power source. Each contact end has flat-end terminals that support a bolt-in connection. Two side-mounted auxiliary contacts (1 normally closed, 1 normally open) are supplied with this unit for feedback wiring. Two additional auxiliary contacts can be added to enhance the feedback wiring.